A/c tensioner pully

[tlr]

Anyone have a spare or part number for the a/c tensioner pulley on a 99 Montero 3.5? It's the vbelt one. I can only find the ribbed one for the power steering.

Thanks

 

[mudraider]

Try NAPA for just the bearing

Sent from my SM-G935T using Tapatalk

 

[RyanY]

The bearing is replaceable separately and is usually far cheaper than replacing the entire pulley. I would avoid bearings made in China though - I'm currently replacing the a/c tensioner pulley bearing on my 95 because the Chinese bearing I installed 6 years ago is making noise.

This is the new Japan-made bearing I just purchased: https://www.amazon.com/gp/product/B017ZB4QMO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Not sure if your 99 is the same - I'd remove the old pulley and get the number directly off the bearing itself before buying a new one.

 

[mudraider]

NSK 6302du I'm a parts need, that is what's in my head.

Sent from my SM-G935T using Tapatalk

 

[tlr]

Napa was no help and the bearing is non replaceable.

 

[bryAWD]

Mitsubishi ASA is showing MB568933 - A/C Compressor Tensioner Pulley Assy.

 

[plh]

Napa was no help and the bearing is non replaceable.

It is replaceable. I've done it.

 

[snare]

http://www.ebay.com/itm/MITSUBISHI-...ash=item3d2b691e3d:g:QsEAAOSwMtxXqu~H&vxp=mtr

 

[tlr]

Well the one I have must be an aftermarket one cause it's a sealed unit. Bryawd that's the one I need, thanks for the part number.

 

[nckwltn]

MB568933 is the part number. I bought one from an eBay seller... it was for the v belt. It is swappable.

Sent from my SM-P580 using Tapatalk

 

[RyanY]

I'm curious how the bearing was installed in the pulley in the first place if it's sealed. Can you post a picture of your pulley?

 

[RyanY]

https://www.parts.com/index.cfm?fuseaction=store.keywordsearch

Could be cheaper than eBay depending on shipping.

 

[tlr]

I've got one ordered as soon as it comes in I'll take a pic of the old one.

 

[tlr]

This is what the pulley that's on there looks like.