A recommended place to get tubing caps

[Mark Harley]

Many parts of our trailer builds require tubing that is round, rectangular or square in
shape. I needed to finish off the ends of the 1" x 2" tubing I used for my RTT rack on my M101A2 build.
so I headed to my favorite store Ebay and typed the search in.

I found a seller that carries many sizes of tubing plugs and other neat hardware.
corner guards, handles, latches, rubber feet, plugs, straps, handles, caps and sleeves are some other items they sell.

I ordered the sizes I need and they arrived fast and look great
Here is the seller I found them at. Tell them Mark Harley sent you!

http://www.ebay.com/itm/261009081473?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

The sellers Ebay Id is: spkrparts!-2007

 

[Kflash]

Ordering up a few 2x2 caps for the square tubing under the Harbor Freight tongue box! Nice site!

 

[kai38]

Ace Hardware has the plugs also, On my yakima cross bars table leg ends work great.

 

[Mark Harley]

I like to support the little guys.

 

[Perfect Switch]

http://www.caplugs.com/

 

[Metal Twister]

For round tube and weld on applications I find steel freeze plugs cap off tubing nicely. Cheap and in every auto parts store there is. Either find the right size that slips in or find a flush fit edge to edge. Flip them over with the round side out and install.

 

[Arlo]

I always keep the tubed ends closed by weldering one end to each other.

Sometimes it make sense to close ends with inlays and drill threads in it.

After welding, ...

... and got it in place.

It takes some more time while producing but will keep you off about problems afterwards. :coffeedrink:
And it helps to get the fluids in and out when zinc plated!

Sorry, being a little late about this.