AEV 40” Kit

[Adventurous]

Thuren full suspension and 40's.

MORE PICS!!!

What's the back spacing on those wheels?

 

[reloaderguy]

you were also able to pick your offset with those Trail Ready's, is a huge luxury for fitting the tires

Did someone force you to buy a specific offset wheel?

 

[reloaderguy]

MORE PICS!!!

What's the back spacing on those wheels?

17x8.5R17 3.5"BS/-32 offset. It looks perfect but 4"BS/-19 offset would have better fender clearance. I don't get any rubbing though.

 

[reloaderguy]

Wow, you need to show us more of that truck!

 

[blackdmax15]

Yo reloader I just sent a request via Instagram. I’m about to pull the trigger and start phase two of my build and looking to mirror your fenders etc. Any more specs etc would be appreciated. Also how long did it take to have the TR beads made?

 

[Ravenmad]

I ordered walker evens deadlocks in 17x8.5 -19 (4" backspace) prior to KOH, beautiful wheel and they weren't to bad at around $400 a wheel. I do have a little rubbing, but thats because of the 43" tires lol.... I think the 4" backspace wheel is a good compromise considering scrub radius and clearance.

 

[Bayou Boy]

I ordered walker evens deadlocks in 17x8.5 -19 (4" backspace) prior to KOH, beautiful wheel and they weren't to bad at around $400 a wheel. I do have a little rubbing, but thats because of the 43" tires lol.... I think the 4" backspace wheel is a good compromise considering scrub radius and clearance.

WOW...what's the overall height of your truck. That thing is massive.

 

[Ravenmad]

WOW...what's the overall height of your truck. That thing is massive.

Its not to bad, deff. on the outer limits of the word "proportionate" though.... 43s rub under full compression with the front sway bar removed though, with the sway bar connected they clear with only a slight rub at full lock on the radius arm and a very slight rub on the inner fender liner at the lower cab cap piece.

 

[Ravenmad]

PS, your truck looks amazing.

 

[reloaderguy]

Its not to bad, deff. on the outer limits of the word "proportionate" though.... 43s rub under full compression with the front sway bar removed though, with the sway bar connected they clear with only a slight rub at full lock on the radius arm and a very slight rub on the inner fender liner at the lower cab cap piece.

That looks great. I'm on the limits of clearance fully stuffed lock to lock. If I push the axle forward 1/2" I can probably fit 42's. If I had to do it all over again I'd probably go 20x9 with 20mm(ish) of offset. Looking down the side of the truck my tires are right at the edge of the flares, 15.5" wide tires would stick out a little. I'd like a set of Treps, maybe next time.

 

[reloaderguy]

PS, your truck looks amazing.

Thanks.

 

[Ddenney]

I'd love to see if anyone has ran the fenders on one of the pre 14 trucks. I have a 2011 power wagon that I'd love to turn into that!

 

[valleythunder]

X2 Reloader. I (okay we) need to see a build post on this beautiful truck!!