Aluminum Versus Steel Front Bumper

[cbradley]

I am finally pulling the trigger on a front bumper for my 2004 4Runner. Demello offers both a steel and an aluminum version. The steel bumper is roughly 120 lbs., while the aluminum is about 55 lbs. Has anyone had any problems with aluminum front bumpers? Is the fuel savings actually noticeable? How durable are aluminum bumpers when it comes to typical offroad use? Any input would be appreciated.

 

[Plannerman]

Would love to hear the same about their aluminum bumper


Sent via fat thumb

 

[Ryanmb21]

I chose aluminum with my aluminess. It is fantastic, I didn't want all the weight.

 

[hilux30]

I went to website but didn't see it, is it an option that is added? I was interested in another brand that I can't recall but felt that the bumper is physically "thick" and didn't look right. But if it looks roughly the same as the steel bumpers then I would go for it, relieves the need for stiffer springs. Just remember if it gets banged and damaged repair is a bit more difficult..

 

[jeeps4fun]

Man I wish I could find a decent bumper for my Titan, and aluminum one would be ICiNG!

 

[lqdchkn]

You should be asking Jason this question. He has good opinions on which you should buy depending on your intended use.

 

[java]

If its an option id probably do aluminum.

Only downside i can see if flexing and stress cracks. But really i dont see it as a big issue

 

[cbradley]

You should be asking Jason this question. He has good opinions on which you should buy depending on your intended use.

Good point; I'll talk to him before I order.

 

[cbradley]

I chose aluminum with my aluminess. It is fantastic, I didn't want all the weight.

Weight is my chief concern. Right now the 4Runner is also my DD. Your rig looks great by the way.

 

[cbradley]

I went to website but didn't see it, is it an option that is added?

It is one of the pull down options now along with the hoop and lighting configurations.

 

[Subspd]

Wow didn't know Dmello had an aluminum version. Interesting... Wow just checked it out $650 :exclaim: MORE than the $1,125 steel version.

I know Relentless Fab offers it for only $150 more than steel! Aluminess it is only $1300 total and is aluminum of course.

 

[olsen_karl]

I know Relentless Fab offers it for only $150 more than steel! Aluminess it is only $1300 total and is aluminum of course.

I have front and rear bumpers from Relentless, in aluminum, on my '08 4Runner. Pics are here at the T4R forum, and I'm happy to answer any questions anyone might have:

http://www.toyota-4runner.org/4th-gen-t4rs/151956-relentless-fabrication-bumpers.html#post1496330

 

[hilux30]

there got to be a reason for the extra $$, or at least there better be a reason for the difference between manufacturers... it would be good to find out..

 

[Ryanmb21]

Weight is my chief concern. Right now the 4Runner is also my DD. Your rig looks great by the way.

The bumper and m8000-s did not degrade the sweetness of my icons, in fact I didn't even have to adjust them.

 

[cbradley]

The bumper and m8000-s did not degrade the sweetness of my icons, in fact I didn't even have to adjust them.

That's good to know. How do you like that winch?