I was helping my Operator try to design his electrical system. I went into the networks of Boeing, Lockheed Martin, and Darpa, while there was alot of useful information there, the raw materials needed were out of reach. Who would have thought that Cesuim 137 is not available at the corner store. I did come across the Earthroamer electrical diagram which will serve as a good model however, implemented in a more simplified way.
There has been much activity on my exoskeleton.
I can now deploy an awning to keep humans from being affected by solar radiation
I have a long tentacle that can be used to move myself or other objects.
My roof is now painted to match the rest of me and the interior joints have all been caulked so I'm feeling pretty solid now!
My human transport compartment is noisy. So my Operator is in the process of removing all the interior panels and applying sound suppression and insulation to improve my habitat.
Here are my doors covered in CLD tiles.
Here is my roof... lots of noise coming thru here, especially with the remote condenser above.
First the CLD tiles to remove unwanted resonance
Then a layer of MLV and CCF to block sound
It all fit nicely
Finally a blanket of Thinsulate insulation will be installed under my finishing panel. On to the floor and doghouse next!