Comanche Scott
Expedition Leader
YOWSZA! 
That looks great! :beer:
I'm also digging your paper towel holder.
That looks great! :beer:
I'm also digging your paper towel holder.
AT Stage 1 and Combo Slide With In-Floor Subwoofer?
- Thread starter Evergreen12
- Start date
Evergreen12
Observer
Thank you for the kind words! I can't wait to get the fridge wired up tonight so we can use it this weekend. The paper towel holder was a sweet find at the local Lowe's for like $3.00, I Installed a couple nutserts in the top and viola. It even swings back out of the way by itself when you close the hatch! One last word of caution when installing the fridge on the slide if you choose to bolt it down. The bolts are Stainless Steel so care should be taken to use some anti-seize on them to keep them from galling on you and getting stuck. Ask me how I know. 😁
Evergreen12
Observer
Well the brown Santa finally dropped off all the materials I've been waiting on to run the wiring for my future LED light. The install of the wiring required removing the drawer, fridge and slide. I planned to take this opportunity to see if it were possible to trim the interior panels to fit back in place. I'm happy to report that it's not difficult at all (if a little time consuming) and you can easily trim them up with a little patience to fit back in there very nicely. I've included a couple pics of the trimmed panels before I reinstalled the drawer and slide. I also took this opportunity to reinstall the rear carpet. I just had to take a little time measuring and making holes for the bolts to pass through. I'm very happy with the final product. I was even able to reinstall the rear panel and both the drawer and slide clear it no problem. It looks pretty factory now right down to retaining the 12V outlet. I did however steal power from the 12V outlet for my LED light project.
