BAE Systems Titan XD 4400 + Bliss Mobil 15' w/ Extras - $525,000 (Boulder, CO)

quickdraw81

New member
PXL_20230620_231250560.jpg


Meet Rhonda. Rhonda, meet the Expedition Portal crowd. We're looking to "re-home" Rhonda for a small fee. She's located in Boulder, CO.

She's a burly, 2012 BAE Systems Titan with 8000 miles that cruises at 65-70mph with no problem (fast axles, baby!). She's been serviced regularly and in great shape all around. On the rear is a 2019 Bliss Mobil 15' Standard box.

We've enjoyed our time with her but need to move on and focus our trips a bit closer to home for a while. Life priorities and whatnot. I'm asking $525,000 for the truck and box or $415,000 for just the Bliss Mobil box if you prefer a different truck. Bliss' containerized concept allows for easy transition to a new chassis.

Bliss Mobil USA's service and support has been fantastic, as well. Not just that, Spencer's a great dude and has gone the extra mile at every request. Can't say enough good things here.

2012 BAE System Titan XD 4400

This is the semi-rare, BAE Systems-produced civilian version of the LMTV. It has the upgraded 6.7L industrial cummins which offers 325 horsepower and 860 pound-feet of torque and an Allison 3700sp seven-speed automatic transmission. It's in fantastic shape for it's age with pretty low mileage (new tires have less than 4K miles on them). It has full-time all-wheel drive, electronic central tire inflation system (CTIS), fast axles, anti-lock braking (ABS) and locking rear differential. Full specs can be found here.

I've taken this truck off-road in some difficult-rated situations and never had any concerns. She's very capable.

In additional to the standard specs, there's a few upgrades:
  • Scheelman seats
  • Storage box left side large on subframe
  • Storage box right side large on subframe
  • Upgraded 113-gallon fuel tank
  • 15' Foot torsion-free subframe
  • Low-profile Donaldson air intake
  • Custom exhaust
  • Frontrunner cab roof rack

2020 Bliss Mobil 15'
This is the standard 15' unit produced in The Netherlands. You can check out the full detail here and here along with a 3d tour and full specs from the manufacturer
(not our unit though).

In addition to the standard features, this unit has the following options:
Happy to chat (832-331-0202) and host anyone to take a look here in the Boulder/Denver area

-Tanner
 

Attachments

  • PXL_20230620_131307488.jpg
    PXL_20230620_131307488.jpg
    3.8 MB · Views: 416
  • PXL_20230725_014405353.jpg
    PXL_20230725_014405353.jpg
    1.6 MB · Views: 386
  • PXL_20230623_012828238.jpg
    PXL_20230623_012828238.jpg
    2.6 MB · Views: 375
  • PXL_20230625_183137461.jpg
    PXL_20230625_183137461.jpg
    3.6 MB · Views: 384
  • PXL_20230619_165147634.jpg
    PXL_20230619_165147634.jpg
    5.2 MB · Views: 423
  • PXL_20230618_223210473.jpg
    PXL_20230618_223210473.jpg
    4 MB · Views: 415
  • PXL_20230617_163605228.jpg
    PXL_20230617_163605228.jpg
    2.5 MB · Views: 412
  • dji_fly_20230723_173856_315_1690155543830_photo_optimized.jpg
    dji_fly_20230723_173856_315_1690155543830_photo_optimized.jpg
    3.9 MB · Views: 408
Last edited:

84FLH

Active member
Tanner,

You post a wordy advertisement for a half million dollar camper but don't post a single interior picture nor give details on the torsion free sub-frame, which would be of keen interest to those wishing to keep their 500 thousand dollar toy from bending out of shape.

Sorry mate, but one can't help asking where the bliss is in that.

Cheers
 

quickdraw81

New member
Interior pics please?
Thanks
You bet. All I have is shots with people and dogs in it. I'm grabbing interior photos tomorrow and uploading them. So, if you have any specific requests please let me know.

Best I have at the moment are attached
 

Attachments

  • PXL_20230618_201611279.jpg
    PXL_20230618_201611279.jpg
    4.4 MB · Views: 439
  • PXL_20230723_214409332.jpg
    PXL_20230723_214409332.jpg
    1.6 MB · Views: 472
  • PXL_20230722_140730564.jpg
    PXL_20230722_140730564.jpg
    880.7 KB · Views: 458
  • PXL_20230623_013436806.jpg
    PXL_20230623_013436806.jpg
    2.6 MB · Views: 463
  • PXL_20230623_011103847.jpg
    PXL_20230623_011103847.jpg
    2.1 MB · Views: 399
  • PXL_20230621_174752755.jpg
    PXL_20230621_174752755.jpg
    2.8 MB · Views: 408
  • PXL_20230620_150450991.MP.jpg
    PXL_20230620_150450991.MP.jpg
    4.8 MB · Views: 395
  • PXL_20230618_210516658.jpg
    PXL_20230618_210516658.jpg
    1.6 MB · Views: 405
  • PXL_20230618_210502541.jpg
    PXL_20230618_210502541.jpg
    403.7 KB · Views: 421
Last edited:

cliffi

New member
You bet. All I have is shots with people and dogs in it. I'm grabbing interior photos tomorrow and uploading them. So, if you have any specific requests please let me know.

Best I have at the moment are attached
What is the seating arrangement in the cab? For how many adults / kids?

Winch on the front?

Is there AC in the cab / in the living unit?

Thanks!
 

quickdraw81

New member
What is the seating arrangement in the cab? For how many adults / kids?

Winch on the front?

Is there AC in the cab / in the living unit?

Thanks!

Hey Cliffi - Two Scheelman seats up front with space between and behind the seats for our pups, gear, snacks, whatever. Bliss/Spencer has a configuration to add two more seats that they have done before but I didn't choose to do it. Pics inbound on the interior of the cab in just a moment though.

No winch. Again, chatted with Bliss about it and priced out a Sherpa. I planned to do it but never got around to it.

Indeed. A/C and Heat in the cab and A/C, Webasto diesel heater and radiant floor heating in the box. Plenty of experience with both heat and AC in the cab and the box and was always comfortable.

Let me know if you have other questions.
 

quickdraw81

New member
Tanner,

You post a wordy advertisement for a half million dollar camper but don't post a single interior picture nor give details on the torsion free sub-frame, which would be of keen interest to those wishing to keep their 500 thousand dollar toy from bending out of shape.

Sorry mate, but one can't help asking where the bliss is in that.

Cheers

Hey 84RLH- Updated the original ad with the specs/details from Bliss who manufactured the subframe and a number of interior pics. Let me know what else you'd like to see.

-Tanner
 

lucilius

Active member
Very nice Bliss box and that is definitely a capable truck. Is the 8k mi mileage you've put on yourself since the camper conversion or total miles on the truck chassis/engine? Is there a possible pass-through? Are the additional seats/belts for humans added in the camper box or up front i.e. how did you/would you take trips with more than 2 people?
 

quickdraw81

New member
Very nice Bliss box and that is definitely a capable truck. Is the 8k mi mileage you've put on yourself since the camper conversion or total miles on the truck chassis/engine? Is there a possible pass-through? Are the additional seats/belts for humans added in the camper box or up front i.e. how did you/would you take trips with more than 2 people?
Hey Lucilius-

Thanks... We've enjoyed it. 8k is the total mileage on the truck chassis/engine.

A passthrough is doable. I talked to Bliss about it early on and know they can do it but didn't get any further than a conversation or two. The changes to the simpler Donaldson airbox makes the pass through easier with less stuff in the way and I actually moved the Bliss box about 18" closer to the cab (just to shorten the truck a bit) which also should help the passthrough.

The additional seats and belts I discussed with Bliss were in the cab but I know they can add seatbelts to the existing couch area in the box, as well.

We rolled with people in the rear for one trip but otherwise it was just two of us and dogs.

Let me know if you want to chat through any of this in more detail- 832-331-0202.

Tanner
 
Havent ever met or spoken to the seller but we have a 15 foot bliss mobil and have driven a bliss through 17 countries on 3 continents. I can attest to the quality of the bliss box and the ability to move between chassis. -40F and its warm and toasty with a shower inside. Anyone would be very happy with this rig. GLWS to seller
 

quickdraw81

New member
Following up on a prior post about the pass through. I contacted Bliss about a passthrough and it's cost. If someone were interested, it would cost $8,200 to install that.
 

Forum statistics

Threads
185,966
Messages
2,880,327
Members
225,627
Latest member
Deleman
Top