Tanto
Adventurer
Curious if anyone has any experience with them. I've looked all over for a review but cannot find one. They are made in China, the specs on the unit I'm looking at are as follows:
CSI Integrated unit:
9500 lbs. Rate Single Line Pull.
6.0 hp /12v series wound Motor.
92', 5/16 Cable.
3-stage planetary drive.
Gear ratio 216:1 (I think)
Max line speed of 42' per minute.
Compared to Warn 9500ti:
9500 lbs single-line
4.6 hp / 12v series wound
125', 5/16 cable
3-Stage Planetary
Gear Ratio: 156:1
Max line speed 26.5' per minute
I know I have most of the CSI specs right, pretty sure on Warn but had to piece the information together.
CSI Integrated unit:
9500 lbs. Rate Single Line Pull.
6.0 hp /12v series wound Motor.
92', 5/16 Cable.
3-stage planetary drive.
Gear ratio 216:1 (I think)
Max line speed of 42' per minute.
Compared to Warn 9500ti:
9500 lbs single-line
4.6 hp / 12v series wound
125', 5/16 cable
3-Stage Planetary
Gear Ratio: 156:1
Max line speed 26.5' per minute
I know I have most of the CSI specs right, pretty sure on Warn but had to piece the information together.
Last edited: