Selling this Industrial bed slide from Extendo Bed. The carrying weight is 1200lbs and it will extend and lock at it's full length. It measured 62 inches long back to handles, 49.5 inches wide with latches, and 35.5 inches high. It mounts to the floor with 4 bolts. Estimated weight is about 250lbs.
It slides just fine. The compartment side hinges are weathered and stiff and it wouldn't hurt to replace the wood compartment floors. Other than that it is all good.
I bought one have it on my fj45 expedition vehicle. You can put a lot of gear of this. It is also pretty easy to modify if you want to.
Asking 1200. It is located in Northern New Mexico.
It slides just fine. The compartment side hinges are weathered and stiff and it wouldn't hurt to replace the wood compartment floors. Other than that it is all good.
I bought one have it on my fj45 expedition vehicle. You can put a lot of gear of this. It is also pretty easy to modify if you want to.
Asking 1200. It is located in Northern New Mexico.