Interior switches question

[villageidiot327]

I'm starting to plan the interior light up/power phase of my build. Having a hard time coming up with a switch panel for lights/fan etc.

What have you guys used? Any links? I don't want something lit up full time, but don't mind a light on the switch once it's switched on.

Thanks for the help
-Colby

 

[Navi]

http://www.waytekwire.com
http://www.otrattw.net

 

[ohpyramids]

Heres a year round OTRATTW*
Promo Code:*thenewx *

Here's a fuse and relay panel I'm pretty stoked on for the interior build. It's like an sPOD but not $600 and you don't have to use their ugly switches.
https://www.lifetimeledlights.com/led_lights/6_circuit_universal_fuse_and_relay_panel

And here's the 6 switch panel blank I picked up:
six switch holder
http://www.otrattw.net/Six-Position-V-Series-Switch-Holder.html

 

[Bbasso]

Depends on the year of the van...
http://www.expeditionportal.com/forum/threads/55074-UJOR-Build-Thread?p=2022682#post2022682

Or
http://www.expeditionportal.com/forum/threads/55074-UJOR-Build-Thread?p=2022698#post2022698

Imho pretty much the nicest options I've seen.

 

[villageidiot327]

Those spods are really nice, but well past my budget. Those are also not quite what I'm lookin for, in that I was looking for switches for the back "house" part of the van. I ordered a switch/breaker panel from Amazon. Along with the other things to set up a cheap dual battery setup.

Thanks for the suggestions

 

[Navi]

Diy spod
http://www.jkfreaks.com/forums/showthread.php?17591-DIY-Switch-Pod

 

[villageidiot327]

Stuff like that is all well and good for light bars, winch, compressor and stuff like that that carries a load. I'm just using a simple switch panel to turn on 2 led dome lights and a small roof fan (draws 1.3amps)

If I get into light bars and such (not likely) I'll have to wire up relays and switches like a s-pod.

 

[Bbasso]

Oh for that kinda switch...
I used very similar ones to these.
http://www.amazon.com/gp/aw/d/B00EJ...SX236_SY340_FMwebp_QL65&keywords=round+switch
The success rate isn't 100% but at the cost one or two bad is ok for me.

 

[villageidiot327]

Oh for that kinda switch...
I used very similar ones to these.
http://www.amazon.com/gp/aw/d/B00EJ...SX236_SY340_FMwebp_QL65&keywords=round+switch
The success rate isn't 100% but at the cost one or two bad is ok for me.

i went with this all inclusive panel, it seems a nice solution to just having a simple switch panel without a bunch of fuss.

http://www.amazon.com/gp/product/B00SLPWWX4?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00&tag=viglink20599-20

 

[Bbasso]

A simple solution, nice.