International 4700 Ambo build

cjken

Explorer
Really looking great.
What kind of fuel mileage are you getting in its current configuration??
20' seems perfect to still be manageable/drivable.
 

Baloo

"The Bear Necessities"
A few more parts are going on the truck, replaced all the bulbs up front!
ImageUploadedByTapatalk1419132148.887425.jpg
ImageUploadedByTapatalk1419132187.869907.jpg
Still have to plumb the intercooler and vacuum down the a/c system.
 

Baloo

"The Bear Necessities"
Figured I would see how much work would be needed to fit the new tail lights. So here is the test fit picture.
ImageUploadedByTapatalk1419640747.529021.jpg
 

Baloo

"The Bear Necessities"
Fabbed up the seat mounts and cut out the cab floor. Next I will take the seats back out and paint the mounts and the cab floor. ImageUploadedByTapatalk1420263592.122857.jpg
 

Baloo

"The Bear Necessities"
Made some progress this weekend. Installed an alarm, wired up the box control panel, sorted out some wiring and installed LEDS in the light for the cab.
ImageUploadedByTapatalk1420425722.066369.jpg
ImageUploadedByTapatalk1420425748.112674.jpg
ImageUploadedByTapatalk1420425793.869008.jpg
ImageUploadedByTapatalk1420425673.809175.jpg
ImageUploadedByTapatalk1420425818.565118.jpg
 

Baloo

"The Bear Necessities"
Renewed the old cabinet lights with leds, waiting on the new lens and switches so I can reinstall them. Of course after a little polishing...
ImageUploadedByTapatalk1420518138.901788.jpg
 

Baloo

"The Bear Necessities"
After a little driving I found a big problem! Cracked exhaust manifold!

ImageUploadedByTapatalk1421032047.307246.jpg

Fortunately the International dealership was able to get one in a flash.

ImageUploadedByTapatalk1421032103.000197.jpg
 

Baloo

"The Bear Necessities"
Installed the LED retrofitted compartment lights, so much easier to find things now!

ImageUploadedByTapatalk1421813278.512362.jpg
 

mp_tx

Observer
Nice build! I plan on stealing some of your ideas. It never occured to me to mount a window AC unit so that it vents into one of the outside access compartments. I need to get busy converting my interior lights to LED.
 

Baloo

"The Bear Necessities"
Once all the wiring is done, I have a shroud that will go over the ac so I don't have to keep the compartment open to run it. However it does work very well.
 

cjken

Explorer
I stuck my AC in this cabinet.
I think your placement is probably more effective.
ImageUploadedByTapatalk1422065319.715970.jpg
I may have to rethink mine.
 

Forum statistics

Threads
186,401
Messages
2,885,632
Members
226,303
Latest member
guapstyle
Top