denton57
New member
I have a 2015 JKUR that currently has an AEV 2.5 DS lift. I have started adding weight due to mods over the past year (ARB bumpers front and rear, Warn XD9i, steel oil and trans skid, gas skid, TeraFlex tire carrier with hilift mount, etc) and I am adding more with a Gobi Stealth, part time RTT, and potentially a fridge and shelf system. My AEV lift has rake built in, and the ARB bull bumper and winch is really bringing the nose down more.
My question is...add a 3/4” spacer to the front with the AEV springs OR replace both AEV springs with the HD 2619/2620 coils from OME? My goal is to get level but to also handle the current and soon to be additional weight. I am not getting rear sag yet (or maybe it’s not noticeable since the front sags so much), but I understand it’s just a matter of time when you keep adding weight. Gobi won’t be here for a couple of months and the RTT (Tepui Autana 3) will only be on the Jeep when needed.
I have the OME coils already. I just need to decide which route to go to be level as well as plan for the extra weight.
My question is...add a 3/4” spacer to the front with the AEV springs OR replace both AEV springs with the HD 2619/2620 coils from OME? My goal is to get level but to also handle the current and soon to be additional weight. I am not getting rear sag yet (or maybe it’s not noticeable since the front sags so much), but I understand it’s just a matter of time when you keep adding weight. Gobi won’t be here for a couple of months and the RTT (Tepui Autana 3) will only be on the Jeep when needed.
I have the OME coils already. I just need to decide which route to go to be level as well as plan for the extra weight.