I acquired a Kenwood TM-D710GA dual band mobile. However the modular cable between the Tx/Rx unit & the Control head appears to be an RJ-11 cable & plug, & the jacks on the control head & tx/Rx unit appear to be RJ-45 connections. I have read some the the posts on the forum which leads me to believe it should be a RJ-45 cable & plug. Yet the magnetic filters had difficultly fitting the cable in one of the posts. RJ-45 has 8 wires, RJ-11 has 4. Because I don't have a "good" cable to examine, can anyone tell me the colors & location on each end of that cable by looking at a clear plug that works? Cat-5 come in 3 flavors, 568A & 568B with 568A being the modern standard ( not counting any crossover cables). Thanks.
Don D.
Iowa.