Up for grabs is a M416ish trailer. The tub was very gone after stripping the paint and unfortunately the only answer was to make a new tub. Built the tub 1st week of March, new parts were added at the same time. I planned on using some contractor boxes on the side. Selling because I have 2 trailers, one needs to go.
The good:
New tub! Standard m416 floor 1/8 steel plate 20" high walls 1x1 1/8 square tube, 12ga walls.
new bearings and races
New dust caps
New shocks!
Parking brake works
Tailgate!
Led taillights
7 pin connector wired (extra spots so you can control lights...or whatever you want)
Original lunett
Zero squeaks or rattles (other than the hitch) I added foam tape between frame and tub.
Frame was osphoed and painted.
New inner tire tubes.
The bad:
It's not the original tub and parking leg has been modified. Parking leg works just not original.
Temporary tailgate latch. I had to take it on a trip the next day so I half assed it.
I slapped together some fenders brackets. (Not sure if I have time to bud real brackets)
The price: $1000
Location 04679
The good:
New tub! Standard m416 floor 1/8 steel plate 20" high walls 1x1 1/8 square tube, 12ga walls.
new bearings and races
New dust caps
New shocks!
Parking brake works
Tailgate!
Led taillights
7 pin connector wired (extra spots so you can control lights...or whatever you want)
Original lunett
Zero squeaks or rattles (other than the hitch) I added foam tape between frame and tub.
Frame was osphoed and painted.
New inner tire tubes.
The bad:
It's not the original tub and parking leg has been modified. Parking leg works just not original.
Temporary tailgate latch. I had to take it on a trip the next day so I half assed it.
I slapped together some fenders brackets. (Not sure if I have time to bud real brackets)
The price: $1000
Location 04679
Last edited:
