MIssion Overland Trailer Owners page
- Thread starter WU7X
- Start date
I put a fabric sheet over our trailer, which is parked between our garage and a side fence.
Trying tokeep the HOA happy and UV off the trailer. So far, so good.
Trying tokeep the HOA happy and UV off the trailer. So far, so good.
For those of you storing your Summit outdoors, what covers do you recommend? The UV in Colorado is no joke...not to mention the wind, hail, and snow!
Hey @rocco89, not sure what kind of vehicle you drive, but I'm putting money down on an aftermarket bumper that has a second hit on the swing out for bikes. I didn't want them on the roof of either the LC or the trailer so this seemed like the best solution. I've seen the other trailers setups on the front rack and that would likely work if you're handy with fabrication but I ride coiled enduro bikes (heavy) so I'd rather not have them swaying while we hunt down good camp sites.
Dissent Rear and Swing Arm Bike Racks?
Looking for some help figuring out a good bike rack setup. There are some threads on the 100 side (and 200 side) that have some data points but I'm specifically looking for racks to put on a Dissent rear bumper. My thought is that it would be beneficial to use the additional hitch on the mount...
forum.ih8mud.com
Hi MO owners. Potential Summit buyer here.
What is the floor made of?
I’ve seen posts/ads saying ‘no wood’ and other posts (in this thread) saying the floor is marine plywood (well sealed and insulated, of course).
Just need confirmation from those in the know. Thanks ahead of time!
What is the floor made of?
I’ve seen posts/ads saying ‘no wood’ and other posts (in this thread) saying the floor is marine plywood (well sealed and insulated, of course).
Just need confirmation from those in the know. Thanks ahead of time!
I took a trip to a dealer that had one in stock and confirmed that the floor is, in fact, plywood.
Maloppa
Observer
Seems the dealer installed battery is a 64ah deep cycle. Runs the fan / fridge for a short time, but time for more power.
A couple inspirational ideas here. One thing I have already found out is mud and water easily gets into the front box.
Not sure why the vent was placed so low on the back wall. Around the wire harness is another place I see water can enter.
A couple inspirational ideas here. One thing I have already found out is mud and water easily gets into the front box.
Not sure why the vent was placed so low on the back wall. Around the wire harness is another place I see water can enter.
Maloppa
Observer
I have decided to go with the new LiTime mini 100 ah lithium. They are much smaller than the standard 100 ah. I was very impressed with the E360 set up posted on the forum, but above my price point. I also built a new box around the area so electronic components can be added later as the build progresses.
Overlandman
New member
Does anyone on this forum know if you can order and where to purchase the wrap material to change the color scheme on the Mission Summit?
Hey @rocco89, not sure what kind of vehicle you drive, but I'm putting money down on an aftermarket bumper that has a second hit on the swing out for bikes. I didn't want them on the roof of either the LC or the trailer so this seemed like the best solution. I've seen the other trailers setups on the front rack and that would likely work if you're handy with fabrication but I ride coiled enduro bikes (heavy) so I'd rather not have them swaying while we hunt down good camp sites.
Dissent Rear and Swing Arm Bike Racks?
Looking for some help figuring out a good bike rack setup. There are some threads on the 100 side (and 200 side) that have some data points but I'm specifically looking for racks to put on a Dissent rear bumper. My thought is that it would be beneficial to use the additional hitch on the mount...
johnburman18
New member
Hi all. My family and I are interested in seeing a mission overland summit in person. Does anyone in Western Washington have one we can take a look at? Thanks!