Overland Tacoma Part Out! - Portland, Oregon

Spixelz

Adventurer
So I've decided to partly part out my Tacoma to make way for a different build. I have the following items for sale!

Alucab Canopy for DCSB. Canopy, Load bars, Side boxes, Table. Fully kitted out. $3000
This is a protoype model that I purchased from OK4wd when Alucab was first getting settled here in the US. This canopy fits 95% of the way and any minor issues and gaps can easily be filled. Alucab as since changed the canopy to be much narrower, which I don't understand. This is a better design personally!

MSA Drop Slide and Whynter 62qt Fridge. I will have photos for these soon as they are currently not in the truck. Both Items are in great shape, the fridge has some minor scuffs on it from just being used. The MSA slide is the best drop slide on the market. Its makes lowering and the raising the fridge super easy even when fully pack! $550 Each or $1000 for both.
https://msa4x4.com.au/catalogue/fridge-drop-slides/ds50-fridge-drop-slide/
https://www.whynter.com/product/whynter-62-quart-dual-zone-portable-fridge-freezer/

AllPro Apex Bolt on Sliders for a DCSB or an ACLB Need Blasted and Painted but in great shape **SOLD**
Pelfreybilt Standard Rear bumper - **SOLD**
Alucab RTT with Shadow Awning and Load bars. **SOLD**

Photos are located here. If you need any others, I can gladly take them.

All items are local pick up only. I can help you install anything listed above.
 

Attachments

  • IMG_20170902_162601.jpg
    IMG_20170902_162601.jpg
    567.4 KB · Views: 335
  • 21318939_1508719139211212_3381813017840078945_o.jpg
    21318939_1508719139211212_3381813017840078945_o.jpg
    453.9 KB · Views: 333
Last edited:

PBnFJ

Observer
I wonder if that canopy would fit on a 2016 DCSB? I see on OK4WD site AluCab makes a different shell for the 2005-2015 vs. 2016 and later.
 

Spixelz

Adventurer
I wonder if that canopy would fit on a 2016 DCSB? I see on OK4WD site AluCab makes a different shell for the 2005-2015 vs. 2016 and later.

It's a bit wider then the ones currently on the market due to being Prototype. You would just need to figure out the tailgate area since it's more rounded. I can take some measurements.
 

PBnFJ

Observer
It's a bit wider then the ones currently on the market due to being Prototype. You would just need to figure out the tailgate area since it's more rounded. I can take some measurements.
Please take some front to back measurements. The tail gate is 1" thicker at center (67") than the edges which are 66" from front to back.
 
Last edited:

Forum statistics

Threads
186,048
Messages
2,881,318
Members
225,825
Latest member
JCCB1998
Top