Post Pic's of your Jeep
- Thread starter jwhutch
- Start date
heehawhardy
Adventurering
EvoMFG Level Kit and Bilstein 5100's
jeepin_idaho
Adventurer
Just finished building a little ladder on the side of the JEEP to access the roof. Next up, I need to design a roof rack...
I love the ladder! Looks great!
Dan
http://facebook.com/the4x4podcast
Typos courtesy of TapATalk
UnlimiDozer
Observer
Mad fab skills! Wish I had the tools . . .
OH, I redid the hood also...
OverlandZJ
Expedition Leader
Driver61, nice work. Do you have a build thread?
'99 XJ Sport Hybrid
Where to begin? Started off 18 months ago as a stock '99 XJ except RC 4.5" lift with 31x10.50 Cooper STT & 3.55.
Added:
OME 3.5" Super Ultimate from DPG. JKS Discos, JKS track-bar. HD coil springs to accommodate winch, bumper, etc. Rear swaybar is gone.
AJ's Offroad front winch bumper w/Warn xd9000i
VisionX LED 20w x 2 20* driving lights
Daniel Stern H4 headlight upgrade w/wiring harness (one of my favorite upgrades).
Old school headlight mesh grates/guards.
28% window tint.
Transmission cooler
Napier Hood Vents
Spectre Cowl Air Induction
62mm Throttle Body
4-port fuel injectors
Kleenoil bypass engine oil filter (www.kleenoilusa.com)
Rusty's Offroad Quarter Panel/Fender Flares front & rear. Front & rear fenders trimmed.
33 x 10.50 BFG KM2 on Black Rock (made in USA) fake beadlocks. 4.75" Backspacing and 1" rear spacers to match track with Warn hub width. Net BS = 3.75". I like them tucked but is still 1.5" wider than stock w/5.25" BS.
JCR Sliders
JCR transfer case skid
JCR gas tank skid
JCR lower rear quarter panel guards (not shown - removed for mods with Rusty's fenders)
JCR Rear Tire/Rotopax/HiLift Carrier Bumper
"BUILT" front and rear diffs (D30/C8.25): 4.56 w/ARB lockers, diff guards, welded control arm skids, Yukon axles, rear disc brake conversion, Warn hubs, etc.
Uniden 510XL CB with 4' Firestick and 102" whip on SS Quick connects.
ARB Compressor.
Ashtray switch panel for ARB Compressor, LED Driving Lights, backup lights, rock lights.
AC Vent dual switch panel for F/R Lockers.
All switches run through single HD relay box.
Kenwood something or another (was in it when I bought it - don't care)
Soon to come:
Iron Man rear spring shackle relocate brackets and possible Iron Man tubular shackles.
ACOS (adjustable front coil spring spacers). Might want 1 - 1.5" more lift for clearance/flex.
Junk rear seat back modified as platform for storage and easy R/R with factory rear seat.
Roof rack. Probable JCR modular & add 'tree sliders' and 'low profile' light mount for 40" LED light bar.
Fire Extinguisher Mount
Flashlight Mount
Storage Drawer or such.
Building a bit of a hybrid Overland/Hunting/Trail Riding/semi-rocker capable outfit.
Haven't had it out of the shop long enough for even poser pictures so here's the most recent.
Critique and/or suggestions are welcomed.
Gary
Where to begin? Started off 18 months ago as a stock '99 XJ except RC 4.5" lift with 31x10.50 Cooper STT & 3.55.
Added:
OME 3.5" Super Ultimate from DPG. JKS Discos, JKS track-bar. HD coil springs to accommodate winch, bumper, etc. Rear swaybar is gone.
AJ's Offroad front winch bumper w/Warn xd9000i
VisionX LED 20w x 2 20* driving lights
Daniel Stern H4 headlight upgrade w/wiring harness (one of my favorite upgrades).
Old school headlight mesh grates/guards.
28% window tint.
Transmission cooler
Napier Hood Vents
Spectre Cowl Air Induction
62mm Throttle Body
4-port fuel injectors
Kleenoil bypass engine oil filter (www.kleenoilusa.com)
Rusty's Offroad Quarter Panel/Fender Flares front & rear. Front & rear fenders trimmed.
33 x 10.50 BFG KM2 on Black Rock (made in USA) fake beadlocks. 4.75" Backspacing and 1" rear spacers to match track with Warn hub width. Net BS = 3.75". I like them tucked but is still 1.5" wider than stock w/5.25" BS.
JCR Sliders
JCR transfer case skid
JCR gas tank skid
JCR lower rear quarter panel guards (not shown - removed for mods with Rusty's fenders)
JCR Rear Tire/Rotopax/HiLift Carrier Bumper
"BUILT" front and rear diffs (D30/C8.25): 4.56 w/ARB lockers, diff guards, welded control arm skids, Yukon axles, rear disc brake conversion, Warn hubs, etc.
Uniden 510XL CB with 4' Firestick and 102" whip on SS Quick connects.
ARB Compressor.
Ashtray switch panel for ARB Compressor, LED Driving Lights, backup lights, rock lights.
AC Vent dual switch panel for F/R Lockers.
All switches run through single HD relay box.
Kenwood something or another (was in it when I bought it - don't care)
Soon to come:
Iron Man rear spring shackle relocate brackets and possible Iron Man tubular shackles.
ACOS (adjustable front coil spring spacers). Might want 1 - 1.5" more lift for clearance/flex.
Junk rear seat back modified as platform for storage and easy R/R with factory rear seat.
Roof rack. Probable JCR modular & add 'tree sliders' and 'low profile' light mount for 40" LED light bar.
Fire Extinguisher Mount
Flashlight Mount
Storage Drawer or such.
Building a bit of a hybrid Overland/Hunting/Trail Riding/semi-rocker capable outfit.
Haven't had it out of the shop long enough for even poser pictures so here's the most recent.
Critique and/or suggestions are welcomed.
Gary
Attachments
jeepin_idaho
Adventurer
Got a link to the H4 upgrade? That's something I've been thinking about for a long time but just haven't pulled the trigger yet.
Dan
http://facebook.com/the4x4podcast
Typos courtesy of TapATalk
Dan
http://facebook.com/the4x4podcast
Typos courtesy of TapATalk
Finatic Angler
Adventurer
lilgription
Observer
Just got my lift and new tires. Front bumper is coming as its in the garage , I started it about a year ago and finished it today
