k6uk
Adventurer
Okay, I've been looking for this thing for a while... and finally found one so I thought I would share:
www.fleetradioproducts.com
This allows you to attach up to 4 radios (or other audio sources) and feed one communications speaker. It allows you to adjust the volume level of each individual input, plus it has a master volume control and mute button.
So my CB, Ham Radio, GPS, and Scanner can all be on the same volume control.
Also gives you a beefy amplifier when you need it to be loud.
A little pricey at 199 bucks, but I'll look around for a deal.
Specifications and Features
* 65W @ 2Ω MAX, 45W @ 2Ω CONTINUOUS (typical mobile radio=5W)
* Use with any speaker combination from 2ohm to 16ohm
* 4 isolated inputs-compatible with any radio
* Individual level control for each input
* Remote turn-on (activation) control
* No audible "pop" or "thump" during turn-on
* RFI/EMI and alternator noise filtering
* Fully Protected Output / Thermal shutdown Protection
* Fault Diagnostics & Power ON Indicators
* Milled Cast-Aluminum Case
* Potted Remote for vibration and moisture resistance.
* Red/Green Bi-Color Status LED on remote with lens for 180 degree viewing.
* Volume knob is knurled aluminum for a quality feel.
* 6' remote cable
* 12VDC @ 4A MAX
* Frequency Response: 30Hz-20KHz
* Amplifier: 4.53 x 3.24 x 1.57" LWH w/o Flanges
* Remote: 2.5 x 2.0 x 1.5" LWH w/o Flanges
* 2 Yr. Warranty
www.fleetradioproducts.com
This allows you to attach up to 4 radios (or other audio sources) and feed one communications speaker. It allows you to adjust the volume level of each individual input, plus it has a master volume control and mute button.
So my CB, Ham Radio, GPS, and Scanner can all be on the same volume control.
Also gives you a beefy amplifier when you need it to be loud.
A little pricey at 199 bucks, but I'll look around for a deal.
Specifications and Features
* 65W @ 2Ω MAX, 45W @ 2Ω CONTINUOUS (typical mobile radio=5W)
* Use with any speaker combination from 2ohm to 16ohm
* 4 isolated inputs-compatible with any radio
* Individual level control for each input
* Remote turn-on (activation) control
* No audible "pop" or "thump" during turn-on
* RFI/EMI and alternator noise filtering
* Fully Protected Output / Thermal shutdown Protection
* Fault Diagnostics & Power ON Indicators
* Milled Cast-Aluminum Case
* Potted Remote for vibration and moisture resistance.
* Red/Green Bi-Color Status LED on remote with lens for 180 degree viewing.
* Volume knob is knurled aluminum for a quality feel.
* 6' remote cable
* 12VDC @ 4A MAX
* Frequency Response: 30Hz-20KHz
* Amplifier: 4.53 x 3.24 x 1.57" LWH w/o Flanges
* Remote: 2.5 x 2.0 x 1.5" LWH w/o Flanges
* 2 Yr. Warranty