Rhino pioneer rack awning help?

[AR Family Expeditions]

I have the rhino rack pioneer rack with backbone system installed on my 2017 Jeep jku. I have been running the smittybilt overlander tent but recently was able to upgrade to the ikamper skycamp 2.0. I have discovered that my awning brackets wont accommodate this change. Does anyone have any suggestions on an awning bracket that will work with the pioneer rack/ikamper/arb awning? Would like some good input before I just shoot in the dark.

 

[akpostal]

Pictures of setup and what isnt working?

 

[zgfiredude]

I can't address the specifics of your combo, but......I have an OVS awning, and the bracket design is different/better than many others that I've seen. They are also quite heavy duty. Might be worth a look. I have the awning on a teardrop trailer and the asymmetrical design of the bracket aided greatly in accommodating the curvature of the roof.

 

[sabjku]

Rhino Rack makes a bracket for the ARB and most 270 awnings. The industry standard for non 270 awnings is 2" on center spacing on the back of the awning, and most 270 awnings are 4" on center. The bracket below works with just about every awning on the market. Or, if not, just drill another hole in the face of the bracket. Easy.

https://www.etrailer.com/Accessories-and-Parts/Rhino-Rack/RR43259.html?feed=npn&utm_source=google&utm_medium=cpc&utm_campaign=Google%20%7C%20Smart%20Shopping%20-%20Accessories%20and%20Parts%20-%20Zombie%20SKUs&adgroupid=78449019583&campaignid=6895757453&creative=389708278730&device=c&devicemodel=&feeditemid=&keyword=&loc_interest_ms=&loc_physical_ms=9008154&matchtype=&network=u&placement=&position=&gclid=Cj0KCQjw_fiLBhDOARIsAF4khR2lMdl7K9a5rhupQG2GqURvMrH6dkDmN-wdI3gAQ-0MifB0DTxDhokaAjaSEALw_wcB