dole
Member
Located in central Utah near the city of American Fork. $5,800 firm.
This Go Fast V1 camper was built for 3rd gen (2016+) Tacoma, which is what I bought it used off of. It is on my 2nd gen (2005-2015) because the camper model is built exactly the same for those two Tacoma generations except for a $25 rubber seal on the bottom of the rear camper door. It still has the seal meant for 3rd gen on it, so there is a tiny gap between the rear camber door in the tailgate if you put it on a 2nd gen. The little gap never really bothered me so I left it as is.
There is nothing wrong with the camper and there's no damage to it. There is some minor cosmetic wear and tear from tree branches scraping the outer panels and some water deposits from the rain. All the original foam pads are included with original upholstery. There are roof bars on the top exterior.
This Go Fast V1 camper was built for 3rd gen (2016+) Tacoma, which is what I bought it used off of. It is on my 2nd gen (2005-2015) because the camper model is built exactly the same for those two Tacoma generations except for a $25 rubber seal on the bottom of the rear camper door. It still has the seal meant for 3rd gen on it, so there is a tiny gap between the rear camber door in the tailgate if you put it on a 2nd gen. The little gap never really bothered me so I left it as is.
There is nothing wrong with the camper and there's no damage to it. There is some minor cosmetic wear and tear from tree branches scraping the outer panels and some water deposits from the rain. All the original foam pads are included with original upholstery. There are roof bars on the top exterior.
Attachments
Last edited: