Metal Twister
Highly Motivated
I realize its not diesel, not late model, and too tall to make a really sweet expo rig. But never the less its what I have and I just want to play for days on end. :wings: The plus side is its old enough that I dont mind slicing and dicing on the ole Jeep if necessary. With all that said I really would like to make this a fully functional Expo rig with the ability to stay out for a couple of weeks with out support. Baja is calling me back. :sombrero: With the height of the rig it is not easiest to get in and out of so Id like to make it eaiser on me. In the storage area I was thinking about about a false floor the same height as the top of the wheel well. Access to the lower section would be through panel doors on the top floor. Then I would box in the side from the bottom side windows to the false floor the full width of the wheel well. Access for the side could be from either inside the rig or from the outside. I would cut the body and hinge it to fold down. The outside access door would be a handy place to stow tow straps, recovery equipment, and tools. Things that you might want to get to without digging through drawers. I would cut it about where the yellow line is. Anybody here done anything like this before?
Last edited: