Recent content by bmxer06pa

Can/should I post this in other for sale threads? Like expedition equipment and trailers? I know this will be incredibly useful to someone, but finding that one person is going to be tough!

I known this is exactly what someone needs…but how do I find that person🤷‍♂️. I’ve sold my motorcycle and am moving to a place where I can’t keep it. I’ve put too much thought and energy into this to just toss it. Let’s make a deal Located in Washington D.C. Will not ship, but I am willing...

Yes I have the normal 12 volt relays from hella.

So are you able to run a traditional relay off of the I/O pins? All of my lights are controlled by relays already. Would I just be able to remove the switches and put the screen in it s place?

Directly side on

Do you have this pic from the side?

I had 12in regular bodies, which I think have the same collapsed length as the 14in short bodies. I wish you the best of luck, but with my 12in reg bodies the lower shock mounts dug into the shock bodies hitting the speed bumps in my neighborhood.

Just be aware that the shock body might hit the lower shock mount before the shock bottoms out.

So you will only have 3in of up travel?

I have the 12in short bodies up front and I had to raise my towers and relocate my coolant reservoir to make them workable. I'm not trying to give you a hard time, but are you sure the 14in short bodies will work in the rear. I believe they have the same collapsed length as the 12 reg bodies I...

Which front shock towers are you going to use? You are probably going to have to raise them a good bit. I had a set of 12 regular bodies and they were completely bottomed out at ride height with 3 in rovertym springs and stock towers.

Just remember if it rubs now it will still rub under articulation with only a spring lift. Changing tire size, lowering bumpstops, body lift, or a bit of tastefull trimming is probably your best options. Trimming being the cheapest and easiest.

A few of me at Rausch creek last weekend!

Did you guys just custom make a 4-link or does someone make a kit?

http://www.farmtek.com/farm/supplies/prod1;ft_poultry_equipment-ft_poultry_fencing_flooring;pgha2215.html