Recent content by kjg26

I have decided on an iota 30amp with iq4 module. Smart charging and 30 amp

So I would need both a charger and iq4 smart module? Are these rugged? Designed for bouncing around? Don't need waterproof as it will be inside a tongue box.

What other suggestions do yall have. I will only ever have one bank. May run several on parallel but never more than one bank. Want something rugid. Want something I'll not need to replace. I think the biggest function this will have is at home but I want it to not be a slouch if I want to...

spoke with Ctek technician today. The D250S will be what i need once i add solar. From what I understand this will charge my house battery via alternator and solar inputs. It will optimize the charge based on what inputs are available and "best". As of right now i think i'll get a Minn Kota...

Battery is a freebie. I'll talk with ctek today. I really like there system but it is expensive.

This will be a fixed amount unit mounted inside the tongue box with the battery. The battery is a AGM SLR 125 from vmax tanks. I think I have it narrowed down between a NOCO Marine single Bank 10 amp charger , Minn Kota precision 10 amp single bank charger and possibly ctek unit. I will speak...

Ctek is a very nice system. Although it looks to be a lot more expensive ones all said and done. Start with a charger. Then add dual system. Then add a smart pass. My system would be just a VSR and a charger. At least for now. Don't have any immediate plans for solar, a couple years down the...

What size battery are you running

What can yall tell me about the ctek. There seems to be a bunch of different ones and I'm confused.

Charging, at this time, a single 125aH battery for an offroad m416 based trailer. I will have it wired to the tow vehicle but would like the option to plug the trailer in to shore power or a generator.

nobody?

I've narrowed down my charging options to either a Noco genius or Minn Kota. This will be a single bank charger. Charging, at this time a single battery with 125aH. Recommended charging current of 8A to 35A and voltage of 14.4-14.9 V. Could possibly add another battery at a later time there...

Do you have a sealed AGM battery? Or is your battery box invented? If so, how?

I have decided to use a 7 pin connector to wire my modified m416 trailer. As of right now I will only be utilizing the S/T/T and marker lights. I am trying to find a pre-bundled wire set similar to the 4 wire sets you can buy almost anywhere...

Starting entirely from scratch