Recent content by Victorian

Well done! Doing this in a confined space AND high up on the truck is a challenge. Cheers

Looks like they are made by the same company that manufactures the scout and adventurer rental rvs

Every year I'm getting calls from customers asking for advice on how to prevent condensation in a DIY / custom camper in winter condition. I experienced this too on my personal camper. This is of course a WTH moment first, but when you start looking closer into thermal dynamics and understand...

Does this qualify :-)

I used full 4x8 sheets our factory custom made for me. Same 1.5mm Lamilux FRP on both sides and marine plywood. Has some weight to it, but worth the look and durability. I treaded the edges with 1/8 radius router, sandpaper and hardwax oil. I used the same materials for the table and it's...

I call BS on that as you are one of the owners of GlobeTrekker. Come on man, be honest and play along.

Working with IKEA is pretty straight forward as most of the kitchen cabinets are based on a systems approach that allows them to be mixed and matched. In my case I combined standard lower drawer cabinets that are 24" deep with 30" deep "fridge" cabinets above to get to the desired overall...

As a furniture maker I always like seeing "wood" cabinetry in my personal campers. It gives it a cozy feel like home. At the same time it's more sound suppressing and easier to replace if needed. Metal cabinets always remind me of garage tool cabinets... I just replaced a couple doors in my...

On our bigger expedition truck bodies we offer a 2' spacing between the FRP internal structure as a standard. Realizing that not every truck/subframe is the same, we can custom place them as required. Subframe width: They should always be as wide as the actual truck frame. Another reason why a...

Great Topic! We use a general rule with our flatbed campers: Any camper with a floor length longer than 8' should have the frame twist put in consideration with an isolating frame. All pending on the truck, these can get more complicated the longer they are. A typical Flatbed usually increases...

Looking good!

It all comes down to engineering and knowledge. Unicat was at the forefront and working closely with Mercedes.

The Quest for the "perfect" most" capable" overland truck keeps the industry buzzing. That's cool! I started travelling self supported back in 1992 with the most simple low budged gear and motorbikes. I had many breakdowns/ met many other travellers on my trips through the Sahara and learned...

Our panels are sourced through highly respected suppliers in Germany. Lamilux, Koemmerling,Puren . We then cut and vacuum press everything in our family owned factory in Asia. Just recently we started working with Gurit and the Kerdyn PET foam to increase the load rating and sheering strength in...

Like sn-85 mentioned, we are not associated with LKC. We are happy to supply you with our flat packed DIY kits or if you are looking for an assembled empty shell, you could always reach out to our partners Tank Expedition in Quebec Link: caouanne