Search results

That should work. Cutting of those toothed "wings the tank sits on will give the tank a better platform to sit on. I posted pictures a couple of posts ago.

Wire up the batteries in parallel then to the inverter. You might want to add a volt meter to monitor the battery power. How are you planning to charge them ?

My homemade platform system in the back of a 200 series can hold six wolf packs. On the right side I have a wolf pack with recovery gear pushed to the front and the flat pack filled with hygiene supplies. On the left are two boxes for dry goods. On the deck, I have room for boxes or whatever...

Lots of options http://www.arizonarockyroad.com/

I added a ratchet strap to hold the propane tanks tight to the mounts. Looks like this will work. Too expensive to lose propane tanks on every trip.

A Gatorade bottle and piddle packs work for night time urges.

We bough the trailer with going back to Alaska in mind. That might not happen this year. I'm not too concerned about the soft top. . If need be we can sleep with it closed . The main thing will be eliminating any smell from the kitchen area. We plan on using a spray bottle with ammonia to...

Just so you know that bottom aluminum plate is held on by quarter inch rivets. Couldn't find them anywhere. But of course Harbor freight had them

My HKB voltage booster arrived from Australia. Works great boosting the alternator voltage. Just pop out the fuse and replace with the booster. This is a great solution to a dual battery setup with AGM batteries. https://www.hkbelect.com/

The lack of current pictures would be a red flag as well as the owner selling it so soon.

The driver side tail light on the trailer was full of water and didn't work. Mark sent me a new light. Thought it would be a simple fix. Zero slack in the wire to work with and one of the crimps was bad so there's nothing to work with on the black wire. So so the only alternative is to drop the...

Newer model. Mine came with a warped door , the wrong hitch and wheel locks without a key

We also use insulated bottles so the wine and Scotch do not get too hot. https://www.wineenthusiast.com/6-bottle-waxed-canvas-weekend-wine-bag

Unfortunately our bar box, a very nice Alu Box did not fit in the space between the cabinet and the bed area. Very tough area to find a container ,box or bag that would fit in the space. Just about everything was one inch too wide. But diligent searching online and I found this wine tote that...

Nope

I spoke to Power Tank and with the brackets we have, there needs to be shims that will compensate for the different sized 10 lb tanks. I am being sent shims . The newer version of the bracket has adjustments so the strap can be made tight...

I cut the teeth off so the tank rests on the plate. Those wings are not fused to the bottom plate so there is a lot of flex with them.

Still available

Trying to see what I can do to get that propane tank to be better mounted. The little wings that the tank sits on are not connected to the bottom of the bracket and are extremely flexible. I cut them off and now the tank rests on the actual shelf of the bracket which is more secure. I have to...