Search results

I added an Dobinsons rear bumper. This is a well designed bumper. Swing out locks to hold the bumper in place and the tire is down low to keep rear window visibility. I'm thinking of moving the MaxTrax from the roof to the rear tire.

OK just stay out of bear country .

My friend (kai38) found that these spring nuts for unistruts work perfectly in Rhino rack platform rack as anchors. The thread is 3/8 20. You could also use screw in an eye bolt in for a tie down point.

The Front Runner stuff will fit you might have widen or drill new holes. I just used some Eezi Awn Alu Box mount on my Rhino Rack with just a little drilling.

20 gallons of gas in cans is probably well over $1,000.00 cheaper than an auxiliary fuel tank.

This is one fan solution.

You could always add another internal fan and run it off the cig plug. I'll be adding an internal fan sometime this weekend.

I've been thinking about as well. Most of the time I'l be using it I will be in bear and mosquito country so leaving the door open will not be possible. I think with the fan and the four windows there should be plenty of fresh air inside. Please read my post of about the wheels so you won't...

I had the hitch changed out for a lunette ring. Now I have much better trailer articulation off road. If need be , I can unbolt the receiver and bolt on the ball hitch. I also added 12 inches to the tongue length so I can make U turns without hitting the trailer and open up the bumper swing outs.

If you haven't checked to see if you have the right tools to change a flat not might be a good time. As I related ,my trailer had wheel lock for the spare without a key. I found out a 17MM deep socket worked on that lock. The lug nuts for the tires are 13/16" A deep socket is needed. A four...

I lined a Au Box today.

unlined and lined.

https://www.crofttrailer.com/croft-pneumatic-wheel-kit/ with a Bulldog internally swiveling jack

Remember anything you mount to those "running boards" will be covered in mud , road grime and beat up with rocks.

Thanks . I'll have to reach out to LRA.

When using aluminium boxes like the Alu Box or Swiss Link lining the inside with tool box liner or spray bed-liner will keep whatever is inside the box from rubbing the walls of the box and creating aluminium dust that gets over everything. I'm using this box as a step for my trailer . The...

A four way wrench will not work on the wheel lugs . I got a 13/16 deep socket and 1/2 drive short extension and breaker bar.

As soon as I get the Land Cruiser out of the shop, I'll be taking the trailer on a couple of ranch roads and see what happens.

The main door. My pop top also does not sit flush to the roof. Mark says it is not supposed to seal but that does not make sense as the canvas would fill up with dust. I don't think the trailer was built with heavy dust in mind like encountered in the Southwest.

Added USB ports to charge phones at night. Some mesh storage and extra handles on the door to assist in opening and closing.