Search results

pending sale ?

We have ten remaining JB Horizon Vision tents we will be selling at $2,337.46 as part of our James Baroud clearance sale over on https://ok4wd.com/brands/james-baroud-rooftop-tents/james-baroud-horizon-vision-rooftop-tent for anyone who is interested in one of these soft shell tents!

Looking to sell my James Baroud Explorer Evo in a custom green gel coat finish from the factory. This is a 2016 model and was installed in July 2016 but removed from 11/16 - 06/17 and waxed before reinstalling and once again in 05/18. Fan was replaced under warranty in 2017 but is due again as...

Sorry for the delay guys! I was able to check out the Khaya 4 this past trip to Cape Town before the holiday, it is super impressive. It basically takes the concept of the Ossewa (4 sleeper / 90% outside living) and packs that punch into a slide in camper on a 5' mid-size truck. Basically...

This was a homemade plate by the customer before he drove over to the shop. If you are looking for bolt in ready i suggest the Goose Gear system https://www.goose-gear.com/products/tacoma-system-base-plate-long-bed?variant=35980929857 The larger bed section is 6' 4" and designed to be long...

On top of these features we have multiple Optional Accessories including: National Luna Dual Color LED Lights Fitted on swivel mounts above and below the bed standard and three more, one on each exterior door. Aluminum Folding Camp Table Sliding Shower Enclosure Shadow Awn 270*...

After way too long I finally have some "good" pictures to share and help highlight some features of the Canopy Camper! (y) This example is a 6' model in silver fitted to a AC/LB 3rd Gen Tacoma. First things first, fitment. When we set out to design the Canopy Camper we wanted a product that...

You are right on! Weight is definitely a big factor, we could create a door that could handle a 35" tire but it would increase camper weight along with costing where the majority of folks will be 33">. I would suggest a CBI rear bar with carrier if 35" tires are in your plans. The door has a...

We are excited to announce that 2014- 2019 Colorado 5' Canopies and Canopy Campers are now available and will begin shipping this March! Both of our Colorado offerings feature a new mounting design from the engineers at Alu-Cab that allows the stake pocket holes to be utilized for a...

Yes we offer spares of all our tent fabrics, DIY?

Well I haven't had any customers report getting struck by lightning, but then again maybe because they were struck by lightning... :p To be honest it sounds a bit frightening but I do not have a scientific answer for you, my recommendation would be to call it if the weather is that bad and...

Six of one, half a dozen of the other really :unsure: Both will have the same overall length within inches, part of the beauty of the Khaya is a 6' camper even if you already have a 5' rig. I guess the only notable difference is the axle being about 12" further back under the camper, maybe...

No worries man, here to help! So canopy campers we have some available stock coming every 3 weeks (mostly weekender and prime spec), custom orders for Khaya and Canopy Campers is 10-12 weeks and all campers are a 50% deposit. Everything Alu-Cab is modular and the extrusion frames allow 99% of...

The canopy camper can be removed, but to make a proper seal ribbon sealer or sikaflex must be used (think of removing the roof or glass out of your car). It can totally be done and jack mounts can easily be made for the extrusion skeleton, but you will have a fair bit of time removing, cleaning...

The front is 46" and the rear 51" inside. Exactly, the awning can attach right to the EXP III versus needing a platform rack. It is a dangerous place to visit with a JKU ;)

The Alu-Cab Gen III inside length although advertised at 2100mm measures at 84" and at the lowest point up front is 9" tall when opened. As far as longevity and durability the Expedition III is unmatched, I currently have a JB / Shadow Awn on my JKU but my next setup will be an Alu-Cab without a...

Yeah man! All of our tents, roof conversions and both campers use the same double layer design with 400-gram UV-resistant rib-lock waterproof canvas, over sized YKK zippers and all seams on the inner layer.

haha nope you were right on man! The new fabric is essentially this kit but now factory installed at no additional cost. ;) Key way to spot it is all Gen III tents that have the orange piping versus black.

Anytime man! :cool: Thanks for making the trip up and enjoy!

That is the German distributors site and i'm guessing they posted up a weight based on estimate. We weighed our palletized campers and deducted the weight of the awning, table, tire carrier, pallet and cardboard after install.