Search results

I would never had guessed an 8274 would bolt right up to any ARB 80/100 Series front bumper. This is what ARB is showing as their Commercial bumper. Please post a photo of your's, if you don't mind, as you've peaked my curiosity :)

^^^ Not going on the front of an 80/100 with ARB bumper without significant fab mods...that's what the OP stated was his intended vehicles.

The M12000 won't fit all ARB bumpers...check that first. Having said that the 9.5XP is one of if not the most under-rated Warn winches in the line-up. It has served me well and exceeded all my original expectations the past 6+ years.

A couple of things: You can replace the master cylinder plunger...fortunately that was all that was wrong with mine...I replaced mine last summer for less than $100 parts. I, for the first time since owning my '99, took it to the local dealer after I installed the plunger (and the Stoptech...

I believe Mudrak in Sonoma has them in stock...give Gary a call first. http://tufdp.dajza.servertrust.com/Default.asp

Maggiolina's are raised and lowered via a hand crank. The hand crank is attached to a sprocket that drives a "timing chain" that connects to another sprocket. Each of these two sprockets is connected to a screw drive...that drives the scissor lifts, found at each end of a Maggiolina, up and...

Yep...the thread title got my attention all right :). Not familiar with the Vampa but wonder if the gasket from another stove top moka pot might happen to be the same...or close enough? You might give Thomas Cara a call; actually you'll be talking to Thomas' son Christopher who runs the shop...

We had a medium Maggiolina Grand Tour for a couple years atop our then AT Horizon. Very secure and very comfortable; big wind didn't faze it. But the timing chain did come off somewhere in Death Valley and fortunately it happened on our last day...so I could deal with it in our home garage...

I would relocate them given how close they are in your photo and eliminate the concern. I wouldn't risk tearing up a remote can and/or hose and/or downstream damage especially given the solution is relatively simple...even more simple if you have or know someone with a welder...just weld a...

Look'n good Paul! I can't remember if you're running front wheel spacers or not and maybe that is the difference for you. But keep an eye out for tire to remote can interference under stuffed, fully cranked situations (along with fully mud coated tires :))...I had to relocate mine for the...

Yes...but that typically is a 5-10 minute wait depending upon if the engine is at ambient air temp and of course what the ambient air temp is. It works great for showering at the end of a dusty day on the trail as I just use the residual heat of the engine shortly after engine shut-down. Or...

I thought the Elite 5 was like the HDS5 in that it had a built in antenna? The built in antenna in the HDS5 I had worked very well...better in fact than my Baja 540c with the external antenna puck.

^^^ FWIW: RCV axles aren't perfect. Birf style boots are prone to leaking; the CV retainer bolts (socket head cap screws) need to be drilled and safety wired or fixed with red Loctite (not a big deal but you'd think for the cachinga they get for them this would already be done); based upon the...

Does anyone know with 100% certainty the Elite 5M/Elite series will display MapCreate 7 topo data files? For whatever reason, like many of the strange things Lowrance (Garmin too) did/does, they changed from SD card to MicroSD card for the Elite 5M. FWIW: The very same topo map files...

SOLD! FOR SALE: Sanden 508 air compressor with 6-rib serpentine belt type clutch with Extreme Outback air intake/output port adapters (O-ring to 1/4"NPTF) for OBA set-up. This came off a late 80's Cherokee; is very clean (the black you see is black paint...the way it was found on the...

I'll see what I can do and post back early next week.

Amazing!

That's good news Mike! Having them admit they are cognizant of the issue is 3/4 of the battle ;)

^^^ 2.5M / 8' 2.4" long.

Funny...I don't remember getting an invitation Roberto :coffee: Look'n good though...all of it ;)