Search results

  1. G

    Bussmann RTMR: Not sure where i screwed up

    I have a jumper that I put between the 100A busbars. I actually was able to figure out my issue. I noticed that my lower independent LEDs on the switches were lighting up but not the upper dependent LEDs. Pulled everything out and found that my power terminal had slipped out of the housing...
  2. G

    Bussmann RTMR: Not sure where i screwed up

    The RTMR version that I am using is model 15303-2-2-4 which does five relays and ten fuses. It also has two internal busbars. From double checking, as far as I can tell I've I jumpered the fuses to the relays correctly. The way I did it was relays with odd numbered fuse slots. So...
  3. G

    Bussmann RTMR: Not sure where i screwed up

    So i am trying to install my Bussmann in my 4Runner but i'm running into some problems. The fuse only side works, but for some reason the relay side is not working. The switches are getting LED power and ground and light up when i turn on my lights or if i toggle them on. So i hooked up some D2...
  4. G

    4xFish 5th Gen 4Runner build

  5. G

    My 5th Gen 4Runner project

    Awesome build. Really like the rear spoiler mounting Sent from my SM-T700 using Tapatalk
  6. G

    IBS Dual Battery Management / Blue Sea Products (5th Gen 4Runner)

    Nice write up. Have a 5th gen myself and not extremely wiring competent. Been trying to figure out a good route to go and this write up will definitely help. Don't be surprised if I shoot some questions your way sooner or later :-)
Top