Search results

Just if it is manual, there is a switch on the clutch pedal to disengage the brake when the pedal is depressed & also a neutral switch to disengage the brake when the gear lever is in neutral

Is the truck manual or auto

I have not had any luck in finding an easy way to clean them. I end up letting them bounce on the tray for a few hundred Kms I have noticed the new version look easier to clean

I use one of these Charge Equalizers on my 24V Isuzu NPS300 http://www.redarc.com.au/images/uploads/images/CE_Instruction_Manual.pdf Also I found it is also worth while talking to your local Caterpillar Dealer for Batteries. Here is Aus they are very competitive & the batteries are made for...

She drove down and is saying the road is badly chopped up, coming from her, that speaks volumes. But you can still drive the road!! that is bigger news. Blah blah blah... I agree with Wendy I just did a quick trip from Bloomfield to Bamaga & back via the Dev Rd last week. 19 hrs driving up & 21...

I have been running the 285/7019.5 for almost 50000 kms so far. I rotate them every 15000 kms - left to right not front to back The work load has been 75% hiway & 25% dirt. No problems so far

On my NPS300 I used 100mm Stainless exhaust pipe when I modified the air intake

I have had no problems with redarc gear. Have you thought about using a charge equalizer rather than a transformer. You have a better control of peak loads. You may need to talk to the redarc guys on how they work with the LiPOs

They are Powerdown Coolcells. I dont have the Part Number on hand at the moment

On my NPS 300 I run the same shocks that run on a Kenworth Airbag suspension rear axle. I went to my local truck supplier with shock in hand & asked for something that fits. The benefit of the air bag compatible shock is that they work 30 to 50% harder that a shock on a standard suspension...

Hi, I find that one of these type of wrenches work well in these situations http://www.tradetools.com/products/619 or http://www.supercheapauto.com.au/online-store/products/Stanley-Oil-Filter-Wrench-Strap.aspx?pid=12566#Description

I just upgraded my Old Rally 4000s with a HID kit off Ebay, One of the best light upgrades I have done for a while

My local truck tyre dealer in FNQ does wheel Balancing. I am surprised that other Truck Tyre Dealers do not do wheel balancing

Hey Andrew, You may be a bit young to know about the B model Mack, That was a gearbox combination to get your head around while driving on dirt roads with a load of logs on. Check this out http://www.youtube.com/watch?v=hjJ8n1aQSfw&feature=related

I am dealing with a NPS300 single cab, however I replaced the pipework with 100mm Stainless Exhaust pipe all the way to the engine, replaced the original air cleaner with a Donaldson & fitted an Air ram with water sep slots in it. When I am approaching water of any depth, I remove the Donaldson...

Rather than oil used / kms. A general rule of thumb 0.5% oil consumption per litre of fuel used is starting to be excessive on diesel engines (This is not a Fuso spec) All engines should use some oil, as oil will get caught in the honing marks on the cylinder wall. If the engine is not using...

Most people have covered all the disadvantages of duel wheels, however one that has been missed is that there is a possibility that when you have a pressure drop in 1 tyre of the pair, that this tyre will overheat & catch on fire. The reason of a few truck fires over the years. Good practice is...

I replace the shocks on my NPS with units that fit on a kenworth with air bag suspension. I ended up in a truck spring supplier & discussed the situation of my truck before the decision was made

You can use the inner wheel nut to hold on your rear wheels, as you will notice the lands on the nut are the same size of the bevel on the rim. Left Hand side is a left hand thread.

I replaced the primary fuel filter with a Racor 230R on my 2002 NPS300 http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId=12218&catalogId=10001&langId=-1&storeId=11151&storeNum=10106&subdeptNum=10407&classNum=10410 I use the 2 micron element & replace every 25000kms I...