Search results

I purchased the jp40 about a month ago. They had a covid special on their website and I got it for a very reasonable 400 i think. In low it pulls 2.3amp and high about 3.5 amps. Came with a cover and it is quiet with a small fan running when the compressor runs. It disperses a bit more heat than...

My engel mu40 did not really get even warm when in there.... but have you considered the affect of covering half of the intake of your unit. Not sure if it will be Ffected of that. You can just trim the bucket further if need be. Looks great.

Yeah..... the power distribution panel came with fused circuits.

I thought about going that route as it would save quite a bit of wire with all the lights I had on mine throughout each compartment and the outside. In the end I decided not to. For no other reason that at each terminating point, I would have to drill and clean paint off, which in the end would...

The weld is normal. You can just loose the nut and as you turn the bolt the off center washer will force movement up/down/left/right of the center part of the bolt. You might not be able to see much until you wiggle the trailer a bit. I found that as you change the camber if the trailer was...

Congratulations. :)

No reason not to at all. It really is what would suit you. We have been camping g for a long time and knew that for us (family of 4) if we had 5 gallon of RO drinking water and 12 gallon of all purpose water that would keep us for 4 days. Most of our trips were 2 to 3 days and so we could always...

I used either aviation proseal or the permatex ultra black adhesive from any auto store.

Trailer is sold. It now lives in Colorado Springs.

We just drove from Grand Junction CO to Lawton OK and picked up our Nano 194BHS, then turned around and went back home, making a trip out of it. We have had just about everything on either two or 6 wheels, so this is not our first rodeo. I agree with the posters that RV manufactures are shooting...

Sorry. Have been gone on a week trip to Oklahoma. Now back.

I thought long and hard about installing an under the frame water tank. It would lover the CG, and be out of the way, thus very conveniant. I would not have mind at all to fab it. The two factors that brought my tank inside the front was: 1: Protection from ground strikes. This trailer is...

In case you want to see how the composite parts were created you can either look in the smitty thread here where the whole build is embedded or visit my Carbon fiber Facebook page. If you look here in the smitty thread it would go faster if you search under my username. There are also a few...

Thank you for the kind words. It has been fun building it and it works awesome. I have actually looked into other hitches, but simply left it on the table until we would venture into very difficult terrain. You would simply remove the pin and pull out the current hitch and install whatever other...

If you have your own RTT and want to save a bit, I would consider taking the tent off and reduce the price. Same goes for the Engel fridge. Just a thought.

Thank you for those kind words Silver. It have been a great ride. We love this very capable trailer. It will be sad to see it go, but knowing someone will be blessed with new adventures shall make up for the departure of the little Smitty. Thank you also for all the inspiration and help you have...

Yeah..... I am truly heart broken as I love the trailer, but my wife was in tears due to hip pain hopping up and down the ladder. Granted after her operation later this year she will be back and able after a long while, and according to her doc, ladder climbing is not on the approved list after...

Edit for above. The 200 pound tongue weight is before the 12 gallon tank is filled.

I hope it is not against forum rules to link stuff in the flea market. Mods if it is, please delete this and accept my apology. https://www.expeditionportal.com/forum/threads/2017-smittybilt-scout-for-sale-15000.216557/#post-2804013

It have been a pleasure to build this one out to where it is today. The Scouts greatest asset is its customization ability. It can become whatever you want. This one went from a tongue weight of 385 pounds to just over 200 with 12 gallon of fresh water up front.