Search results

Fido time! I am almost completely caught up with old footage. I hope they lift this stay at home order soon so we can go make more memories! Allan and Sakshi

The latest:

I follow all factory recommendations except on the rear diff. Because it is a clutch style differential it is very sensitive. If you put synthetic fluid in there the LSD will stop working. I use conventional API GL-5 and I add two bottles of Ford LSD Friction Modifier. If you don't do this...

Oh yes! So glad I didn't worry too much about making it pretty. Fido has had a hard hard life in my ownership. But with proper maintenance the truck has been absolutely trouble free so far. Allan

FIDO TIME!

I believe the axles they used alone cost $15000. Which coincidentally is about the cost of a used fuso 4x4.

I've run into this before as well. Took a minute to figure it out! Allan

Still plowing through years of old video content. Here you go:

What year is that truck?

I used oak. Must be a hardwood. Pressure treated is too soft. Soft wood will compress and cause your U bolts to come loose.

I am a big fan of the stock bumper. Just threw a receiver hitch underneath for my bike rack and away we go!

For your distraction a Video of our Dirt Road trip through Northeastern Canada. Fido and I were joined by AJ and Goldie in their Earthcruiser FX for a three month ten thousand mile trip. We traveled a good portion of the TransCanada trail from Lake Michigan to the Atlantic Coast of Labrador...

In conditions like this I never touch the brakes. Just let the engine control the speed in as low a gear as necessary. In any case we opted to circle the wagons and camp for the night prior to trying any downhill sections. By morning it was much less sketchy. Allan

Added for additional realism:):)! Have since replaced it.

I'm on a roll. Just hit the airwaves with another video....

Finally took a moment to stay home and process some of the tons of video I have accumulated over the last few years: This is three earth cruisers and ourselves in death valley spring of 2018.

Have posted a few more videos of late. See link: Fido video

My short wheelbase FG flexes very little. This is largely due to the massive subframe I built according to the FUSO factory builders guide out of 3/16" box 10"x3". It is U-bolted every 18" along it's entire length. This combined with the reduced leverage of having a short wheelbase and a...

Try www.totalcomposites.com in Vancouver BC

I would probably try to make friends with your local race car fabrication shop. Take lots of pictures and they will get you sorted out. Have had terrible luck approaching traditional truck fitters as they are generally hacks and have trouble thinking outside the box. Allan