Search results

I have a satellite communicator I was looking to sell. It's a "Somewear GPS Satellite Hotspot", see www.somewearlabs.com for more info. I wanted $280, let me know if you're interested.

Was it blown? I'd imagine not if the vehicle was raising ok. 10a may have overloaded the ECU but otherwise can't think of a reason why it would be an issue.

I've been chasing a few issues with my air suspension recently and I'll tell you it can be a long patient game to narrow down the exact source of a leak. There are two options, you spend a ton of money just replacing random parts until the problem goes away, or you spend the time and narrow...

Thanks! Yeah my mileage isn't great, and I basically put the rack on right after I bought the vehicle. I think it might have been around 17/18 stock and now with 275/65R18s and the rack its about 15/16 so not a terrible drop and that's probably mostly due to the tires. For the roof storage...

Nice setup, and thanks for sharing! I love my LR3 and have been slowly building it up and doing preventative maintenance from recommendations on this forum as well. I went the 80/20 route for my sleeping platform and although it's really nice to have it modular it was more of a pain than I...

Personally not something I need but that’s a creative idea. I am more interested in that CAD model of the LR3 you have, where did you get that? Sent from my iPhone using Tapatalk

Still available? Or did dsw1020 take it?

I replaced all mine as well from ebay recently. They all worked and nothing was missing from the package although there are extra bulbs I didn't know where they went. They're a tad on the white/blue side so pretty harsh compared to the soft yellow of the originals, otherwise very bright...

@Avslash, no you definitely don’t need to reset changes to each corner. I forget the sequence but I believe if you exit build mode it will return to normal. Also I think you can return to normal mode with the suspension height control lever on the console. Sent from my iPad using Tapatalk

One thing to consider though with these older air suspension vehicles is that they will lose air and lower if you're not running the compressor to refill them. Weeks if you're lucky but my 2008 LR3 will slump over night and I'll wake up in the morning a little off kilter. I plan to rebuild the...

Yes! I do this all the time. Gap makes it so easy. You need to enable build mode in RLM-Suspension under Service/Test. Then go to Test Values. You can control each corner individually. All I wish was for Gap to show a level on the screen. Otherwise you can throw a bubble level in the car...

That would be great, I’d love to read more about the details. Sent from my iPhone using Tapatalk

That totally makes sense once you lay it all out like that. Putting together all the wiring and connectors for my Blue Sea kit was a bit of a pain. Plus I haven’t even gotten to adding a cable run to the trunk with power from the aux battery. The Traxide sounds perfect if you want an all...

Nothing against AUS products etc. The Blue Sea was available on amazon, cheaper and from the spec sheets, it didn't seem like the Traxide was worth the price over the Blue Sea. Their website mentions it's "specifically produced for a Discovery 3" but doesn't give any technical details on why...

Unfortunately I am on my phone atm, and that link isn’t working. The CTEK D250SA can also be used in conjunction with the Smartpass 120 which is essentially an intelligent relay. The manual states: “Start assistance SMARTPASS 120 automatically connects the service battery to the starter...

I hope this isn't hijacking the thread too much, but I am hoping to gather some info for my dual battery setup in my LR3. A while back when I was researching different options I came across the Traxide system. I was put off by their terrible website and the fact that I'd have to source things...

3 buttons Uncut Blank Smart Flip... https://www.amazon.com/dp/B01LPZEFPY?ref=yo_pop_ma_swf Fairly simple to swap the electronics and key into this new shell although the key blank was a little different than the original so it took some filing to get it to fit. Maybe someone else has a...

For anyone who might find this helpful. I mounted a single ARB in the space in front of the spare battery compartment. I think my mount is somewhat unique since it doesn't require a fab shop. Because of the unique shape of the sheet metal in that area there isn't a flat place to mount to. I...

Does this support the ability to change tracks from the steering wheel? If so that would make the cost worth it to me!

I can see all of them on my iPhone. I was super excited for this until I saw the price tag. $159 for a Bluetooth module and charger [emoji857] I accomplished the same thing for about $20 from Amazon with a USB powered aux out Bluetooth module and a cigarette lighter USB adapter. Now all I have...