Search results

now does anyone know if I can do a one wire GM alternator install with a CS 10 or 12? I have done this with my Samurai and went from maybe 40 amps on a good day to a fresh 90 amps on a average day :wings:

Nice that is in much better shape cosmetically then mine . I did manage to finish install of my winch ..so if you want to put one on mine is a pretty solid simple way to do it.

Hey Spokerider ill keep ya in mind if i drive to vic :ylsmoke:

Im so done except to find a sharp cone bit so i can enlarge the holes to allow a standard pin on both extensions to allow ease of removal :ylsmoke::jumping:

now to attach the baseplate with a few tack welds check the ability to slide on and off then thats done. then to upgrade battery and alternator

http://www.ebay.ca/sch/sis.html?_nkw=2x+19+LED+RV+Car+Truck+Trailer+Rear+Light+Tail+Brake+Reverse+Turn+Indicator+Lamp&_id=231561122054&&_trksid=p2057872.m2749.l2658

well heres the mount for the winch im guessing after bolting it to the frame with gr8 bolts 1/2 " I will be bombproofing it by welding the frame pieces into place. i have figured out I have bought extra material and have some cutting to do. The extra material will be used to make a tow point for...

Nice! In my replacement body i have a dash with the stock tach, only problem is im going diesel. So i found this it gets glued to the flywheel http://www.ebay.ca/itm/Hall-Proximity-Switch-Sensor-NPN-4Digital-Red-LED-Drehzahlmesser-RPM-Speed-Meter-/291512102567?hash=item43df79aea7

:bigbossHL::088: AHHH now IC the interest in my Trooper you want it for parts !!!Hands off by the time i am done with this I wont be able to afford it !

:elkgrin: Ah well "I'm not a smart man Jenny".... well heres the plan i will be cutting the top tab off my stock bumper mount and notching the bumper also . the notching will allow the pins to be inserted to hold the winch in place so it can be removed the 2x2 steel will be welded in place...

heres my adult rigs the Samurai is a 88.5 model (square vent) . it will be getting a different tub a stretched frame to accommodate CJ suspension which will be a must when I also drop in a 1.9 TD from a VW., The Isuzu is a new to me 2 months ago 88 with a 2.6 and A/T so far the...

https://www.youtube.com/watch?v=_yyq19HxrW4 any ideas https://www.youtube.com/watch?v=XO7aI6w0rRg i got the welding help...sorry its sideways i will keep up with pics as i progress the plate im talking about is the base plate for the winch. the tube i show is 2.5 inch 3/16 and i...

Sounds your a man with a plan now. drive line can be addressed by three main ways one driveline spacers two new drive line made three longer slip yoke fabbed

now that I am getting my stuff together to start in on my 88 Trooper 2.6 w A/T . I am buying stuff for it , i want to slap a 8k winch on it and know i wil wnt to upgrade my battery but while at it i want to upgrade my alt. what have you guys done to help your electrical when using a heavy draw...

heres mine not being rescued . had a good day :Wow1:

you will encounter issue with brake line length . drive line length ,pinion angle ,steering angle and steering connection .brake line and driveline length are relatively straight forward .steering angle can be addressed by getting a steering adj when done at a shop.but steering connection can...

No when its not acting all Italian on me it runs great but I have a few issues with mine I hope to sort out . ie replace exhaust , mount winch bigger battery and alternator . a vacuum leak etc its new to me but like i say when its running right its good

as promised the non standard (i believe) rims and the GPS install location

Geez am i cheap... I was installing my GPS into my trooper but it didn't power up. I realized it was the fuse (mini) so i went tp my electric stuff drawer to grab one. Well im out so i scrambled around a bit in the tool box i take to the wrecker. I found one after a while but im kinda upset that...

and then reassemble using fresh lock washers if replacing nuts and bolts GRADE 8 is the minimum recommended