Search results

and of coarse 2 pack top coat

2 pack primer

2 pack zinc chromate primer

that has been a while, over 12 months since my last up date but i have progressed a fair bit, just haven't posted updates. preped for respray

if on the first pump you have a low but hard pedal and the second pump a higher but still hard pedal the shoes need adjusting imo. i have not done mine yet [2007nps300] but normaly there is a star wheel type adjuster that needs to be adjusted manualy

not sure if this applies here but i have always loosened off cable adjustment before adjusting the shoes. readjust the cable to get the right handle height, about 6 clicks?

you need to add a engine watch dog when you can. reads engine head temperature rather than coolant temp, has an alarm as well

don't know much about the fg140 but in general it could be the hydraulic master cylinder starting to bypass the piston seals after you have held preasure on it for a while like riding the clutch. try giving the clutch pedal a quick pump and see if that helps

have a look at the sherpa winchs, good price and well made. I have a 17000 lb going on the rear of my nps and a 17000 lb twin motor going on the front

thanks dan, i have seen those around so i will give them a try

Hi all, i am looking for brand recommendations and part numbers for rear shocks to suit my 2007 isuzu nps300 4x4. It will be at close to its 6000 kg gvm most times and will see some rough dirt roads and a bit of off road but nothing severe. Will probably end up fitting load assist air bags when...

thanks for your thoughts every one, i have decided on a full hard sided box with a internal head height of 1900mm and external height of 3000 including solar panels. No going back now as panels are ordered.

Hi all, i am starting to feel that i am becoming a serial pest on here but i have found that the real world knowledge on here is unbeatable. My current dilemma is that i am on the final on paper drawing stage of the camper box before i take it to the expensive part of turning it to reality and...

hi again mate, how did you proceed with the mounting of the awning, you were worried about mounting it to the roof because of the extra swaying of the roof without a scissor lift fitted. I am at the on paper stage of wall panels, door and awning fit ect and wanted to mount the awning to the...

https://mypolice.qld.gov.au/maryborough/2018/01/04/police-cant-believe-eyes-fraser-island/

hi steve , i only put the seats r us link up for 4X4 TRUCK as i thought it might help him out, i have never used them, i just saw their add the other day. when i bought my 2007 single cab it had 2 stratos seats already fitted and blue plated. all i had to do was redo all mounts that were used as...

thanks for the replies every one, i have aimed at 200 unloaded and i can't see this being a problem