Search results

Nothing wrong with aluminum just Alum-Line are crappy builds. The welding is downhand and the channels isn't thick enough. My $0.00002 to fix (welding the other side will delay cracking) this would be to add a 6" long doubler (3/8" flatbar) between and the gusset. The doubler would go flat on...

I ran KO2s and was going to put K03s on my Tacoma but the KO3 looks more like an All Season that an All Terrain.

There's a recall on Kelderman radius arms that might be something to look into.

Maybe this should read Panel Maker In Panic Mode

STI is independent which is better but STI mechanical design and Timbren customer service is a disaster. After 3-4 requests they let me talk to the engineer at Timberen about possible solutions. After 1 converstaion he ghosted me so I came up with my own solution.

There a piles of used solar panels one FB and Craigslist

Buddy just had the DRW to 41" G275 Goodyear tires done on his truck. I was really surprised it didn't include a steering stabilizer.

They did a good job on the frame. I'd recommend some plastic isolation (mainly the top pockets where mud/salt will build up) between the steel/aluminum.

These are the Timbren STI axle rod/bushing off my trailer after 5000miles. Timbren in their wisdom they decided to use dry (no grease/oil) composite bushing with a seal ONLY on one side. The iron (rust) oxide acted as a grinding compound on both the axle rod and bushing. Other than...

I use MSR Blizzard stakes. - tie the guy line to the bottom of the stake then drive the stake into the ground. - tie the guy line to the middle of the stake then bury the stake horizantally in the ground so it makes T....same can be done with numerous items ...sticks/rock/bags/hiking pole. -...

Anyone thinking of these should read posts #54 and #59

The BMS will heats up immediately when in use while the cells on/against a cold /floor/wall remain below freezing. Easiest solution is 360° air circulation around the battery(s) and a Bluetooth thermometer. Some Lithium batteries will have sensors on the BMS - the case - the pos/neg terminals -...

Where are the temperature sensor(s)?

Milton Ind. https://miltonindustries.com/ My tires are 80psi to 110psi so I use an inflator with a 5' hose. Subscribe to the email list and you'll get 50% off notifications.

Adding and an outside vent to the heater is better because the wasted heat if the exhaust can be used the heat the incoming air. This is a concentric vent I made.

What is the max size of a panel? Type II XPS? Nice to see an honest R value rating!

side to side weight balance

A 3 way is a 2 way with a cheap DC-AC converter. A 2 way running off an inverter is the same thing. Portable and propane cooling aren't a good combination as propane cooling needs to be level to work properly. I have DC compressor and 2 way (propane/110V) refrigerators. The propane doesn't...

RVs have 2 stage regs since the appliance use inches of water column.

There was one for $1900CDN = $1400US If the door is on the back it needs to have 5X the sealing vs it being on the side.