This is a problem I am thinking about as well! My wife and I only have our first so far (9 months old) but we are looking to have 3-4 kids total.
Here are some of the thoughts I have had:
-Normal class A/C motorhome: lots of room but typically passengers sit sideways or lap belts only, so...
I had a 2500 Avalanche with the 8.1L engine and I was getting several trouble codes. I dont remember what they were but sound similar to what you are getting. I cleaned the MAF and the codes went away. The story I head at the time was the oil from K&N type filters gets on the MAF and it gums...
Very cool!
I apologize for the dumb question, but what is the reasoning behind keeping the under hood insulation?
My original hood for my Jeep was damaged by a hail storm about 7 years ago. My replacement hood (aftermarket with vents) did not come with insulation and I cant say I have...
I am glad I was able to offer some ideas to get you thinking, even if you decide to go with something else! Yes, Jeep parts are always expensive, and good point on the cheap plastic melting!
The website that I linked to for the perforated steel also has slotted and Honeycomb styles. Maybe a...
I have been following this thread and love what you are doing! I have a 2 door Jk Wrangler right now and now that my wife and I are growing our family, I am starting to consider what kind of camping rig will come next.
To give you an idea for your hood, here is what I have seen done in the...
I know this is an older thread, but figured I would add my quick thoughts in. I use my camera while traveling so I have a setup to match. I have a Nikon D750 with a Rokinon wide angle and the Nikon 28-300. The 28-300 is not a great leans at any one focal length, it is highly compromised, but...
It would take a decent amount of tinkering and knowledge both of the engine and how to properly set the programming up, but it could be done. My understanding is there are modern cars on the market today that do similar power or boost restrictions based on operating perimeters.
More...
Just an idea, I am assuming someone sells a boost controller that could reduce the boost based on a programmable item, such as exhaust gas temperature. This could help be a safety factor should things start getting too hot instead of having to manually watch the gauge at all times. At 800F you...
Workerdone,
I agree that an immersion heater wouldnt work for any kind situation where you are trying to warm a flow of water like what OnBeechRoad is doing.
However, if you are letting water warm up in the sun over a couple of hours, it should add some heat. Would it actually be worth it...
I wonder if you added a 12v immersion water heater to your setup if you could warm the water up even faster? Or make it warm enough for those rainy days? Amazon sells one for less than $6.
You have to love a good on-board air system! I have 35s on my jeep and air down whenever I am wheeling (typically 12 PSI since I am not on beadlocks). One tip I have learned is dont waste your time with an air tank if all you are doing is airing up tires. What you end up doing is get a quick...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.