Search results

two more items you probable have on the list but not mentioned are the double batteries and the 400 w inverter . I think also on the 350 you can get 18 inch steel wheels and A/T tires ,not sure they are available on the 250

sorry think i screwed up the weight . it would be about 420 LBs . brought it home today ,it is very back end heavy ,i guess because of the double doors . We had no tong weight and i had to stop and purchase a few bags of ready mix to through in the front .I had a 5 x 10 trailer and it would not...

I have been specking out f350 as well , if you can get it in your area look at the snow plow camper combo package . it increases spring rates alternator out put and has wiring hook up for the plow, that i think could be used for a winch . also i would look at the manual locking hubs and transfer...

The One I am picking up tomorrow is an 8 footer with no over cab box . they say it weight is 300 KG ,that is 660 LBs i be leave. it has no side doors as well so that would be saving a bit .

I think the biggest advantage will be , I can build it out without having a truck tied up . My ARE aluminum cap that I have about 75 % completed the truck needs to be there . if you need materials on hardware you have to pack up your tools or take another vehicle . If you have one .

I was low bid today at Bryans auction on one of these caps . It does not have the extension over the cab though . looks good in the pictures,will know better when i pick it up . Think i got real good deal was just fooling around and did not think I had a chance . now I need a F250 with an 8...

Hi I have just finished the install of my new max Coupler . I would like to provide some experience gained from this . This thread is not intended to bash CU or max . So I ordered Part # 210 . It is a bolt on to a 2 inch tubing style . I have a new aluminum 4 x 8 trailer it has 2 x 4 box tube...

maybe I will send amazon guys the part number Nevadalover sent me and see what I get . thanks by the way .

OK thanks guess I had better give up on this project ,sounds like more then I expected . thank you again

Ok ,so is it not part of the turn signal wiper switch ? maybe that's why i can't figure it out . rock auto does not list them . the one they sent me has it on the end of the multi switch,and the 4 way flasher button is a lot smaller then mine . but the switch plugs in and bolts on .

thanks I will give it a try

Hi ,I am looking for the part number for a multi switch for a 2009 GMC Serra 1500. with cruse control . My truck did not come with cruse control . I watched some videos were guys just add the switch plug in the extra lead and add the 15 amp fuse . and it works . I bought one on Amazon CA and...

try Summit racing , drag race cars require real long studs . You may still have to weld a redi nut to a lug nut to extend it out far enough .I dote any redi nut thread would match a wheel bolt . some duel back wheel set ups use something like you are talking about.

I had one about 16 years ago . had leather and all the goodies , it was very nice to drive . If i recall it was a bit hard on gas ,so i would not go more gear then you need .You must be in the south to have found one so clean .

I followed along on a 550 build ,when it came to the part where buddy said the single wheel set up weight was 300 lbs each and he had 6 with the spears .and a winch system to get them on the back of the truck . It through me off ,that is half the weight of my L200 Mitsubishi . if you berry one...

I have not followed them so sorry was not up to date . i just remembered the the cargo doors were great if you had a trailer . even on my current pick up the tail gate won't open as it hits the electric tong jack.

so i finally got around to installing the 2.5 front an 1 inch back lift and level kit on my 2009 gmc Sierra today . It sits real nice now . sorta wish i had bought the longer shock spring lift tough . it was a lot of work and my shocks are original and it would not have been any more work to...

I too have wondered why people don't use them ,as they are good vehicles. they are one of the top towing vehicles around . I hope you were lucky and got the back barn doors . I just put a 2.5 inch front and a 1 inch back ,lift and level kit in 09 gmc Sierra today sits real nice now .

Ha Ha thanks Jacob , glad I could give something back.

I would disagree with you , my tank has a welder on tag that the filler wipes off and reads as part of the visually inspection ,this is telling him the information that the tank meets code . also when a vehicle is being transferred to a new owner all propane equipment and tanks are to be...