Search results

Jim You truck is turning into a major trail rig . I like the new rack and lights. We need to get out sometime thanks Don

yes I did, It was a mistake to get too "blingy". Too many problems with fancy wheels. When I bend a steelie, I can find another one for cheap. I do want to get 16's with 35's for my next set. I am looking for the right set to run that combo with.

Thank you Strolling through Wallyworld after I got my truck, near the checkout and I spotted the infamous lightbulb mod. I got the picture in my head, about turning the bulb on when I decide to do something fun on a trail, and could see it mounted on my dash. Another member of the group...

Thank you I do believe it helped with cabin noise. It definitely helped with keeping the cabin cooler. It was 114 today, I had my a/c cranked to past glacier setting, and it got the cabin to a cool 67F, with the air set to recycle. I also did insulation and sound deadening around the drivers...

Lake Tahoe I really enjoyed this trip... memories

Thank you Sir I tried to get the whole build on at once so it would all be together. You jumped in the middle somewhere:sombrero: I appreciate the nice words

Wikid has a few extended length features After the Overland Expo and seeing the Camping Labs display, I thought this would be a great addition to make trips more enjoyable. Fernado and Camping Labs is a great guy and his tents are very nice and cost effective. I have not deploy it yet, but...

Here are a few shots from the white blind run through the course This was the very first time I have ever tried to drive without having the use of windows. It went well. I found a few views I still need to make it easier, but it was fun to do. Best thing is wikid is still in one...

more pics

Since I changed my mind on colors I had to redo the monitor pods in the correct color. That took the most time since I had to pull everything down and pull all the monitor cases out to make a clean install over my custom console. It was worth the extra effort for sure. Installed and making...

Ok After testing my system in a local rough wash area, I cannot get the video system to mess up so I think it's ready to finalize. The picture reflects wires secured with the sound deadening. I used strips of it to stop possible wires coming loose and rattling in the headliner. The sound...

Here are the 2 ecu's wired and ready for testing. I am going to make a wire keeper for the top of this where all the wires that come out of the ecu's will so have support above them so they won't wiggle out. Testing mode doesn't require neat appearance til I know its right As part of my...

I decided to make a harness for all the switches in the OH console. I ran one 12 gauge wire for power and a ground. Then soldered and wired each switch. I used (2) 5 wire cables to use as trigger wires to run to all of the accessories that will need to be switched. I should never have to pull...

Even though it doesn't look like it, we are fairly close to trimming everything out and doing final adjustments, before the headliner goes back up. Its a slow process because this is totally custom and there are many things that come up while we progress Wiring in the 2 ecu's that are...

Camera 3 Rear roof . I decided a narrow view camera would be best for most conditions since I will also have a wide angle camera on the bumper Progress on the overhead console I used headliner material to cover the monitor pods and made a center section which will house both of the keypads...

WIKID has eyes for you... Beginning of Baja Camera System Install While I am doing this project I am adding stuff as I go Since the headliner is down I am doing a few things to make life easier. Wilson 1000 antenna roof mounted. Say good bye to the lil will Mag mount. You won't see...

I have used 5.5 inches past the fenderwell. the box is tight and secure. It will also house my own version of a quick disconnect battery jumping system along with a blue sea 12 curcuit fuse panel . I have complete control of my electrical system without compromising space. I will be adding a...

The Box I made a mount in the location of the sub woofer and built it up to the level I needed to be above the trim The next part of the puzzle is the faceplate for the bottom section which will be removeable when servicing is needed Fiitting the important parts is next. I wanted to make...

I like the cleaner look under the bull bar now. I didn't like the large gap inside the bumper. It looked unfinished I decided to go get some steel and fab something up to fill the hole. I went to the steel place and looks through the scraps. I found some 3/4" angle and some plate steel with...

Easy install of supplied switches for all the extra daylight A little tuck Body mount chop done with 8ball Exhale Magnaflow, custom 3" bent for high clearance First set of heels Hankook 285/70R/17 I will be adding a few more pictures with my newly aquired mods soon...