Search results

Brand new, never taken out of the bag annex for a Mt. hood or similarity sized tent. My RTT is mounted on a trailer so it's way too low for this to be of any use to me. Goes for 250 new on CVT site, will take 150 Will trade for an 6.5 foot /2000mm awning wall set Located in 08035... Will ship...

Even though the ball coupler on my Bantam works perfectly fine, I feel the need to work on it so I'm getting an 18" piece of receiver tube welded onto the front so I can have a removable insert for security and ability to switch to whatever is necessary..... Now I'm looking at the Max Coupler as...

As my trailer build is roaring towards a finish... I need to find a way to stabilize the trailer when I have the RTT deployed... I was planning on getting a pair of the atwood legs and bolting them onto the rear but after some measuring, I realized that even their largest model will be too short...

Removed my Bantam T3-C axle today so it's up for sale now...50 dollars, located in the South Jersey, Philadelphia area 49" hub face to hub face 36" spring center Hubs spin freely.... PO replaced the studs on one side at one point so all threads are now RH Obviously.. The one on the left

For everyone here, regardless of what trailer they may have, be it a 100 dollar homemade trailer or a 40k+ turnkey rig.... Where do you have your bottle openers mounted... I have mine on the way as I ordered one from Amazon. I'm thinking of putting mine right above the taillight on the rear of...

I'm going to be replacing the axle on my Bantam to match the bolt pattern on my toyota and for ease of mind as I don't know what the original axle has been through the past 70 years I believe that the spring center to spring center is 36" and the hub face to hub face measurement is 49 3/4" I...

Does anyone know what the measurements are for the Bantam t3-C axles, in particular the distance between the hub faces and also the spring centers?.... I think they were the same across all the military 1/4 axles such as M100, T3, Willys.... Normally I would get under my trailer and measure them...

Is there anyone here who can confirm that the spring u-bolt plate with the stud for the lower shock on the T3/M100/M416 and other world war II era 1/4 ton trailers is the same ones as found on the CJ2A? i can't find any places that sells them but the Jeep ones look very similar! i cant seem to...

Hello.... After adding my RTT to my Bantam, it sways quite a bit because the suspension on there is original and is sagging bad so I'm going to replace both leaf springs, u bolts, the shackles, the bushings, and the eye bolts and while I'm at it, will also get u bolt plates that have the shock...

Just installed my used, new to me CVT Mt. Hood and while setting it all up... I noticed two black straps that's attached to the bottom of the frame that's closest to the door... One end is attached and the other end isn't attached to anything but looped..... My guess is that it's so that people...

I picked up my new CVT Mt.Rainer RTT today for my Bantam trailer project and while transporting it, I realized that every single piece I have for " camping" are all from different companies due to the cost at the time, the availability at the time, and the sizes...... My RTT is CVT, my awning is...

Almost done fixing up my Bantam TC-3.... http://www.expeditionportal.com/forum/threads/134503-What-did-I-get-myself-into However, my passenger side fender is dented quite badly and has several rust holes on it, so I thought instead of trying to salvage it, I would get new fender for both...

I know quite a few companies such as CVT, Tepui and a few others offer these awning extensions that attach to the awning but can they be mix and matched as I have a TJM awning which looks exactly like all the others with the aluminum channel at the end. I have looked around and I haven't been...

Had been looking for awhile for a nice cheap trailer to build up and eventually carry a RTT... Came across a 1950 Bantam T3-C in central jersey so I went and looked at it.... Bought it for a decent price as it needed some work done to it.... Namely rust.... The floor is a goner but the frame is...

Picking up a bantam trailer tomorrow to start my build.... Looking for a RTT to mount to it.... Is anyone having a Black Friday Sale for their RTTs ?

I found a used kiwk kamp tent motorcycle trailer locally for a good price.... Has anyone ever converted these to run bigger tires and a stronger axle to pull behind an SUV..... Would kill two birds with one stone, not having to buy a RTT and a trailer separately ... Looks to be extremely light...

Looks sweet! https://southjersey.craigslist.org/cto/4700980591.html

I had originally ordered a ARB slide for my 50qt fridge to go in the back of my 3rd gen but after issues with the vendor and shipping and the wrong part and disreprencies in price, I had no choice but to give up and cancel it and hold off on getting one for the time being. Turns out a front...

I have a 79" bag awning (TJM) on order for my 1999 4runner which will be fitted to my whitson metalworks rack.. Now, I've seen them mounted to either the driver or passenger side but I'm unsure which will work best for me.... At this point, I'm thinking passenger because it just feels more...

Very clean and meticulously maintained.... Will give a decent price break to ExPo members... Looking for a small pick up truck or an older ambulance.. Located in Haddon Heights, NJ 08035 http://southjersey.craigslist.org/cto/3246229981.html Also will entertain for fixed roof vehicles as I will...