Search results

GF and I on the Mayo.

It was getting dark as I mounted up the door panel last night, but i still tried to get a couple pics. Stove fits well and its just the right height.If you look close you can see the power port with the lighting plugged in. Latch system.

Yesterday I started on my "Northman" Inspired barndoor panel. I bought a sheet of .063 aluminum. I used the original panel for a template. And cut a piece to match. I used rivets to attach the hinge for the table. Also cut out a hole for a power port. The plan is to power this port from the...

Woo-hoo!! Got the second window installed on Sat. When you see this its starts to settle in on ya...... man I hope i measure right! Close up of inner frame.

I really like this idea!! Exactly what i was thinking except on the other side. Behind my ladder/toolbox. Does anyone think airflow would be an issue?? Here's the current setup for reference. How about the added weight on the hinges?? Any issues there?

I have had that style insulation in my cart twice , while shopping at Lowes. Keep us posted on the results!

Sorry to hi-jack a for sale add , but can you share some info on that awning(brand,where purchased?)? Thanks

For anyone interested, I swapped in one of the windows on Sunday. i was on a tight time constraint so I didn't get any "during" pictures. But if any one is interested I'll get some when i do the other side. It wasn't difficult at all, just a bit stressfull cutting that big of a hole in the...

Got some more done this weekend. I ran the wiring harness for the power windows and door locks while I had the dash out. Swapped in one of thhe rear windows from the parts rig. I was on a very tight time constraint so no pics of the process. I'll get those when I do the next one. Anyway...

The plan is to finish up swapping the dash/front interior, then I plan to swap in the rear side windows from the parts rig. Watch for updates. I think these windows are gonna be a great upgrade!! Can't wait to get them installed!

Scored a parts rig off craigslist :sombrero: It had a ton of parts on it that i had been looking for. Check out this beauty! First up was the dash (Actually worked out good because i am in the middle of replacing the heater core, with the dash removed this job will go much smoother!) The brown...

PMs answered. Thanks for the interest!

Folding rear bench.(folds down to make a bed) Blue in color, with seat belts.$50 Spare tire rack. Mounts to driver side rear door $25 Rear ladder. Mounts to passenger side rear door $25 (4)Swivel seat Pedastals only. NOT actual seats.$15 ea. And a few more things .... let me know what your...

Has anyone swapped in windows from a conversion van?? i bought a parts rig this weekend that has some really nice windows in the rear section(large tinted windows with sliders at the bottom,with screens). I would really like to put these in my van. The design appears pretty simple. The outer...

If I am not mistaken this was the problem. There was a small two prong plug hidden underneath a rubber plug. I removed the plug and ran a jumper wire back to the main + wire coming out of the alternator.To "excite" the alternator. This got the system to charge.(once the engine rpms raise a bit)...

PLEASE DONT!! That thing absolutely rocks!!!! Large front hubs lead me to believe there's a 60 hiding under there to!

I have a 1981 E-350 Quigley. Its an ex-ambulance. I recently had the alternator go bad on me. When I pulled the alternator I found it to be an extra heavy duty 165 amp unit, i am assuming this was required for all the interior extras of the ambulance. I sent it to a local shop to see if it...

No affiliation. http://roanoke.craigslist.org/rvs/1986616237.html

Good lookin van. No affiliation...... http://roanoke.craigslist.org/rvs/1979490910.html

Seal line dry bags are awesome. I have several and they are several years old , showing no age. Excellent quality! http://www.cascadedesigns.com/sealline