Search results

I think outside magazine need to spend a little more time on this forum and on the tread to get a better idea of all that is out there as exp. trailer! But still, nice looking and if it suite his need, it is a great trailer!

You must know that honda as the HRV, AWD built on the fit platforme. Toyota as one similar in size too. And yep, the renegade by Je/iat. ;)

Hello JKBiker, welcom to the forum! 'Nice CJ7 Did I miss something, do you have a turbo on a 258cu?

I used double side 3m foam tape, and it hold the x-grip rammount set up for my samsung galaxie tab8 with an otterbox cover. But that is in my dd. In the jeep, it is mounted to a windshield frame cross bar system.

I prefer unlimited supply, so I went with OBA, a viar 100% duty cycle with under body air thank hidden between the frame rail and the drive shaft of my Tj unlimeted. Set-up used to be in my YJ. Never had any issue, never had to bring a back-up, actually helping friend with co2 thanks from time...

Nice trailer and set-up mister F.

Like mentioned above, a trailer does not flex, but you want to look at a couple of things. In my book, better to go with a beefier bearing and hub load that you think you will need, bit at the same time, you need to find a suspension set-up that will absorb bumps. A suspension to stiff will...

Man, you are on EP, you need to ask at least 3 time more to be able to sell it here. Nice little trailer, perfect for many adventures and I that price, easy to customise un many ways.

This is what my gf has on the top of her autohome columbia. Was install by the PO. As been on for a complete winter once. Completely forgot about it. Was back spinning the minute it got sun on it the following spring. Not enough to cool down, but great for humidity and condensation. Went...

Cool, thank you. I am a bit in that situation as well. When I started offroading with my jeep, I was dreaming of adventure, back road and desert traveling, but My buddys had jeep and wanted to wheel, so the YJ became a trail machine on 6" lift with 35" and lockers. Bit I was still driving 800...

A line, what line! Support creww follow with a complete truck. I supply the truck to a friend who forgot to read the fine print at the bottom of the page on our traveling agreament. It is stated that in case of catasprophic failure on any of the vehicule, he is responsible to find a way to...

Curious, I know you flipped it, but why would it be your last rock crawling trip? To many close calls, to tipsy, just no more trailer on a rockcrawling trip?

Yep, and also direct connection to the battery + and - is how winch c pany like warn wants them connected. I went with along the inside of the frame rail both in nylon mesh cable protector. Sorry, forgot the name. This is what is recomended by bus and train manufacturer for any snake type and...

Just make sure when you built this that the hinge/pivot point is big as... tought. Big off road tire, sometime back rack and well a bike rack that bring the weight way back specially if you go with 4 bikes, put a lot of stress on the rack construction and the pivot and clamping system. And if...

the pics where the trailer is upside down has to be the cargo tie down test. Right?? Lol This as to be the tie down test! Lol

To that, I have to agree, we do thing the way we each want and I respect that. But to me, it is still a bit weird. I have had many falt tires whille offroading and driving in my life, from a lost bead to a plaine flat tire. I mostly reset the bead on the spot w/o using my spare or plug it and...

Ok, this I do not get. Why carrying the spare inside and the stuff outside. I do not think that you will need the rack on a DD situation. You could si ply have smaller modular rack on each side of the spare for the extra stuff.

I will jump in as well. It is for a 2006 LJ, but I wanted to save the back seat for my dog, an alaskan malamuthe, but in order for the fridge to fit, I had to install the rear seat on sliders. This is how it locks to the back seat floor rails. I simply slide the drawer system in the back of...

Perso, I have purchase pneumatic actuators x4. But have not started the project yet. I have on OBA in the jeep, but I'm pretty sure I will be able to lift the rack +rtt even with a bike pump if I need to. And no electricity to take down. Should start in that in a few week, but I have to...

Ok, this would not work in a tree less area, unless you leave the shovel near by! But I like it enough to make my self one. I will probably spend an hour on my machine in front of the tv do to it with scrap piece of material.