Search results

Any suggestions on how to remove the rear air valve? I was able to easily remove, clean and reinstall the front one but the rear one was very difficult. I bailed out before I did any damage. Do I need to remove anything else (besides wheel). Rover was sinking in the front and cleaning out that...

Can anyone direct me to the best place to mount a CB antenna on the LR3? I do not have a roof rack nor the solid steel front or rear aftermarket bumpers. I will eventually get the frontline roof rack. I am seeing posts about using a NGP (non ground plane) marine antenna - wondering if that is...

Any intel on the compressor rebuild kits I'm seeing on eBay. There is one with the desiccant/ filters and the other with screws/ seals. Any input if one or both is worthwhile? I'm sure my desiccant should be replaced and have a fair inkling that this is causing issues with the valve blocks...

Am I correct in understanding that my parking assist on my '08 LR3 HSE will not work if I install the LR Brush Guard or any of the aftermarket bumpers (front or rear) and/ or winch & mounts? I understand that the arb will allow air bags to operate but unsure on the parking assist. It would...

Are any of the spare/ open fuses in the passenger compartment of a 2008 LR3 eligible to be used for a CB radio? I do not want to "share" a fuse from another circuit but trying to make for an easier install. Eventually I will put in a 2nd battery but trying to tackle some easier projects. That...

Wondering if anyone has designed spare tire access for the LR3 so that the tire may be dropped without removal of cargo boxes (if installed) in the rear of the vehicle. I have an HSE with 3rd row seating and spec'ing out a platform. It seems that it could be possible to devise some kind of...

The air bag warning light is on when the car is running. This originated after my battery died and I was getting multiple faults which I nicknamed warning light mayhem. I was fairly certain the battery was bad. I subsequently had this confirmed, tested and replaced. All of the other warning...

I recently acquired an LR3 and got by the truck sinking overnight by removing and cleaning out the front air block. :) Now I have an electrical problem. Was setting up home link so was performing this activity with AC on plus radio. This operation took me less than 5 minutes. When I went to...

Let the beatings begin. I was very excited to drive home my LR3 - 2008 LR3 HSE. I do however have what I believe is a significant problem. The rover loses height overnight so thisis textbook air suspension leak. Once at height, the compressor does stop and I did not notice it coming back on...