Search results

Can confirm mine is off by about an 1/8 of a tank too. I actually ran out of diesel on the test drive.

I wish I would have taken more progress pics but I usually forget when I'm in work mode. I decided I to gut the interior so I could make some mods and do a better job of insulation. For others that are building these you'll notice I cut away the diamond plate aluminum from around the inner...

Bumper to bumper is just over 21' Inside box length is 163ish"

Hi All. I've seen a few other ERV builds on here so I figured I might as well start one too. I've been meaning to start one for a while but just haven't gotten around to it. A little back story on myself. With regards to hobbies and general lifestyle I consider myself a builder first and an...

I formed an aluminum u channel to go around the opening that spans from inside the box to inside the air dam and used generous amounts of silicone to seal it up. Time will tell if it's sealed well enough but I'll probably just consider that to be dampish so I'll use plastic bins etc when...

Here's what I ended up doing when dealing with the same issue. I think 2"x2"x1/4" angle would have been a better choice of material but the 2" channel worked well. There's no noticeable flex in the tube that I cut. I used VHB tape on all contact surfaces

It's great to see another ERV in here. I've been happily socially distancing and building mine during this Covid mess.

If you remove the headliner you will see the heads of the bolts although you'll still need to cut the deflector off from the outside and then remove the flange because it was installed before the box. On mine I decided to cut an access hole from the box to use the area for storage from the...

Did someone here buy this? The auction was at $1500ish but a Buy it Now price of $2500 popped up and I was so tempted to buy it. Such a good deal.

I picked one of these up last Nov off Ebay for $9500 and it's a great platform for a camper conversion. Extremely well built and everything is nice and square with plenty of aluminum frame structure to mount to. Would definitely recommend getting one if you get a chance. I plan on starting a...

I'll say it was more than asking price but still a good deal for both us.

Sold it all together.

The truck has been sold. Thanks for all the interest.

Hi Paul - This one is 15' and started life as a emergency trailer for a phone company so it was never a camper. I say that because I'm not sure if what I've done will work on a camper version. It has 1" foam in the walls from the factory and I added another 1/2" to the inside. There's plenty...

Sale Pending:)

Here are some pics of the interior. The lift bed frame, drawers, (2) 25 gallon water tanks and benches are mostly installed. The idea is to have the table on slides above the two large middle drawers so it can be stowed away for more room . Sorry for the wide angle pics but it's tough to get...

I added some more info about the habitat in the first post. I'll add some more pics soon.

St Bonifacius Minnesota. Just West of Minneapolis.

I've got a few people interested in just the truck so this might be an option.

I would consider it but in my eyes the majority of the asking price is the truck and the habitat is just thrown in because I have it.