Search results

Hey Tex, Thanks. Those are to keep the sidemarkers in the fender. EVERY TIME I hit some little tree branch it seemed like it was breaking the plastic tabs that hold the light in, then my buddy would radio me and say, "Dude, your lights hanging out again." I got tire of duct taping them and/or...

Hey Kpack, Thanks. Heimed UCA allows for additional adjustment (camber/caster). That also allowed me to move the lower front all the way in the lower rear all the way out, thus getting the hub/wheel/tire as far away from the cab as I could, then dial in caster and camber from the UCA. (We...

Hi Sean, I used the Camburg Clevis adapters...and you know, they may be a little off on point compared to OEM, but it was minimal and I would think negligible. It would be such a minute amount of bumpsteer that I don't think you'd even know (I've had plenty of vehicles with bad bumpsteer over...

Hey Sean, 3/4" heims on steering. FK JMX-12T . As far as bump steer goes, the OE geometry has not changed.... .120 sliders are more than beefcake unless you are bouncing like a rock buggy. I've definitely put these through their paces. Here's some photos of the skid plates that I bent the...

Reserved for Post 20

Reserved for Post 19

This table has proven to be so useful! Cooking up pulled pork or whatever. This is the aluminum one, they make a steel one that is cheaper. I got this as a blem for $110.

Snorkel mods. I had the other snorkel that we all have that sticks up, but it kept getting caught on tree branches etc....I used this LC one, used 3" turbo tubing, ran into the air box, made a bracket to bolt into the roof rack, made a bracket to extend the ditch light....

The BD knock offs....the faceplate doesn't fit over a real BD lens cover (I bought flood BD Covers) so I had to modify it all. lol. And then I welded the Proto socket to HMMWV scissor jack. .

Continued.... .

Continued.... .

More interior mods.... .

Interior Mods... .

Front Runner Footwell Water Tank. 10.6 gallons. Non-pressurized. I used Mil-Spec B32 lever activate buckles. mainly for dog water, washing dishes, extinguishing camp fire etc....shower will have to be something else???

Lower Links and Panhard I built. PC'd OD Green. I offset the bushings on the links for "rock slideability".

Rear 3.0 Bypass. Made new shafts with uniballs, etc. .

Gas Tank Skid Plate I fabbed - 3/16" plate, 2" C Channel, tabs. Skid Row plates on the front half. .

Rock Sliders I 2x4x.120 & 2x2x.120 with 2x3 angle at frame. Powdercoated OD Green, then ground and weld where needed. .

UCAs and bolt mod stuff. .

Firewall Tub. Trimmed fenders and flares as well. 35s clear at full bump/full lock. .