Search results

US Wheel Adapters in Texas can take care of you, I've used them on a couple of M416 builds.

I mounted my spare underneath as close to the axle as I could place it, it does restrict the clearance a bit, but it actually touches the underside of the bed. I built a mount across the front of the bed on the tongue, the mount holds two 5 gallon scepter cans and a 50 cal ammo can for tools...

I have a set for my M416, I use them when towing with a JK, when I tow with my MK or YJ I keep the stock M416 rims and non-directional military tires on it. The US Wheel adapters work great, and you can match the rims to your tow vehicle.

That large front diamond plate box limits what you can do up front which is probably why the previous owner welded the jack to the lunette, if you removed the propane and fuel tanks from each side you could weld on removable leveling jacks to each side, or put a smaller tongue box on up front to...

I mounted mine 15" above the edge of the bed, I am impressed with the welds, you can raise the crossbars of lower them if you cut the uprights: Elitewill Adjustable Heavy Duty Extruded Aluminum Trailer Roof Ladder Rack for Enclosed Trailers on Amazon. It can be bolted through the sides of your...

Welcome to the club. US Wheel Adapters in Lubbock TX can make you the adapters, you just tell them what wheels are going on, TJ, JK etc. Shock replacements are Early CJ shocks, I kept mine stock height, so I can't comment on the axle flip although there are a number of forums with info on the...

As Verstad said you can just measure them or take the remains to a trailer shop, they should be the same as cj3 u-bolts

Excellent work, great trailer! Word of caution, with the short tongue and the front gear on the trailer, be careful backing so you don't jack knife into your rear bumper....not that I've learned the hard way backing up my trailer with a tongue box! My tongue box was donated to another forum...

Test is over The ice is gone and the water temperature has risen above freezing, so to recap I put 40 lbs of ice in the cooler that hadn't been pre-cooled along with room temperature canned beverages, the test began on Friday morning and concluded this morning, so I was able to get 10 plus days...

Sun or shade Outside in the sun, overcast and a couple of days of rain

A couple more days have passed Still ice in the cooler, 27.5 inside, a couple more days and it'll probably be melted, the high yesterday was 72, we have a cold day today in the low 50s.

Still testing, It's been a week Temperature stayed pleasant last night at 71°and it hit a sunny 82° today. I started with forty lbs of cubed ice last Friday morning and now I have 8 lbs remaining in the cooler. The water temperature is now 28.2°. I will keep the test going until the water hits...

Getting close to a week The low temperature last night was 57, daytime high today was a sunny 78. Instant read thermometer displayed a temperature of 28.5°. The ice inside is still a solid chunk of cubes with water in the bottom, it looks as if this test will be longer than 7 days. Tomorrow...

Another day of the test Still cold at night the low temperature last night was 46, daytime high today was a sunny 62, the temperature should be climbing back up to upper 70s/80s tomorrow. Instant read thermometer displayed a temperature inside the cooler of 27.5°. The ice inside is still a...

Low temperature last night was 51, daytime high was a sunny 65, it should be climbing back up to upper 70s/80s tomorrow. Instant read thermometer displayed a temperature inside the cooler of 25.8°. The ice inside is now a solid chunk of cubes with water in the bottom.

One more day of the test Low temperature last night was 59, it's currently 79, instant read thermometer displayed a temperature inside the cooler of 25.6°. So the internal temperature has gone up .2 since yesterday, just a little less ice than yesterday.

Same thing here

Test Day 3 Low temperature last night was 54, it's currently 62, instant read thermometer displayed a temperature inside the cooler of 25.4°. This is the same internal temperature as yesterday, it doesn't appear to be any less ice than yesterday. After reading Schlitzy's post it looks like the...

Test Day 2 24 hours have passed. Low temperature last night was 54, it's currently 64, instant read thermometer displayed a temperature inside the cooler of 25.4°. Some ice melting has occurred. I'm going to leave the water in the cooler during the duration of the test.We are expecting air...

It's to the top of the cooler but since it's cubes there is some air space.