EverRidesurf
Observer
So I have had this idea floating around my head for a while and thought maybe it was time to try it. I was inspired by the snow peak baja stove. The whole set up was done by existing "stuff" I had laying around.
1550 Pelican Case Chuck box -- what do you think?
- Thread starter EverRidesurf
- Start date
mountainpete
Spamicus Eliminatus
I like it. How do you control the flame? I don't see a valve.
EverRidesurf
Observer
Thank you for all the compliments. If I didn't tween the pictures there might have all been laughs. To answer the questions,
1. It is a single burner $20 stove that sits on top of a propane bottle. I cut out the base plate from aluminum and fasten the stove to it. I used 1/2" 13 unc carrage bolts for the legs. (it will stand and work on its own.)
2. I am concerned with the propane bottles underneath also. I did run it for 30 min on high and the aluminum base was only warm to the touch. In the future I would like to fing an adapter that feeds to the bottom front, then the bottle wouldn't be underneath and a control valve can be more accessible.
3. The control valve is underneath the table. Like I said I am looking for something that moves it to the front.
Thanks again this forum has been an inspiration
1. It is a single burner $20 stove that sits on top of a propane bottle. I cut out the base plate from aluminum and fasten the stove to it. I used 1/2" 13 unc carrage bolts for the legs. (it will stand and work on its own.)
2. I am concerned with the propane bottles underneath also. I did run it for 30 min on high and the aluminum base was only warm to the touch. In the future I would like to fing an adapter that feeds to the bottom front, then the bottle wouldn't be underneath and a control valve can be more accessible.
3. The control valve is underneath the table. Like I said I am looking for something that moves it to the front.
Thanks again this forum has been an inspiration
1leglance
2007 Expedition Trophy Champion, Overland Certifie
Now I am even more impressed to see how you took something basic and worked it around like that.
I have a very small 2 burner stove that I got at Bass Pro
http://www.basspro.com/Bass-Pro-Sho...duct/10209543/71503?cmCat=CROSSSELL_THUMBNAIL
And it would fit your needs perfectly if you adapted to the flex hose....and it would give you 2 burners.
Again very cool and thanks for posting this
I have a very small 2 burner stove that I got at Bass Pro
http://www.basspro.com/Bass-Pro-Sho...duct/10209543/71503?cmCat=CROSSSELL_THUMBNAIL
And it would fit your needs perfectly if you adapted to the flex hose....and it would give you 2 burners.
Again very cool and thanks for posting this
