1999 Dodge Ram w/ 2020 FWC Hawk & Custom Bed- $57.5k obo (Final Price Drop)

[McLean]

For Sale: Complete Rig- 1999 Dodge Ram 2500 (diesel) with 2020 FWC Hawk and Custom Bed

Location: Bend, OR

Price: $69,000

We are listing our beloved truck/camper/Bug Out Build for sale. This setup has exceeded our expectations and is ready to rally in a moments' notice. This build contains all of the essentials while still maintaining a very maneuverable and capable off-road rig. Will cruise at 80+ MPH and get 17 MPG under normal driving conditions.

Link for more photos: https://photos.app.goo.gl/5MuwFyEhdosC1HaT7

Description:

The Truck:
1999 Dodge Ram 2500 4x4
24v 5.9L Cummins Diesel Motor- ~199k and counting (diligently maintained)
Extended Cab, Short Bed, SLT Package w/ leather interior (9/10 condition)
Auto Transmission- Rebuilt @190k
8800lb GVWR (HD model)
3.55 Gears with rear limited slip differential

Performance Mods:
MBRP 4" Exhaust
ATS 3 piece exhaust manifold
S&B Intake
Full Gauge Package- EGT, Boost, Fuel PSI, Trans temp
Fass DRP Fuel Pump
Edge EZ Tuner

Other:
35" Nitto Ridge Grapplers w/ 17" KMC Wheels (matching spare included)
Fox 2.0 RR shocks from Accutune (valved specifically for truck + camper)
Synergy Suspension lower control arms & track bar conversion
Borgeson steering box & shaft w/ HD Moog T style steering
F & R sway bars (factory)
Rear Hellwig air bags w/ Daystar cradles
Trail Ready Front Bumper w/ front hitch and 4" Fog Lights
McLean Metalworks rear bumper w/ swing out- integrated high clearance hitch & recovery points, swing out incorporates hitch for bike rack or other accessories
3m printed wrap installed in 2020- can provide files for replacement of panels
Upgraded stereo with subwoofers under rear seat
Husky Liners floor mats

Bed:
Custom built in 2020 by McLean Metalworks
Low deck height to preserve low camper COG, stepped sides for full tire clearance
Steel tube "chassis" (powdercoated) skinned with Aluminum and ABS plastic
Custom storage boxes integrated into bed structure- sealed and lockable
Flip down doors designed to be used as tables/work surface- hinged low for ergonomics and larger usable work area, epic outdoor kitchen setup!
Large storage areas behind flanks- not sealed for maximum storage area (great for chairs, bbq, water jugs, etc...)
Fuel filler hidden behind lockable door
Integrated camper tie downs- spring loaded for truck/camper flex
Custom tie down system in bed and flank storage using modular unistrut fasteners
LED taillights

Camper:
2020 Four Wheel Camper Hawk
Rollover couch configuration
Mechanical Camper Jacks
Jack Bracket - Aluminum Upgrade
2-Way Refrigerator/Freezer - 130 liter
Forced Air Furnace w/ Thermostat
DSI 6 Gallon Water Heater w/ Outside Shower
Powered Roof Vent Fan
Extra Roof Vent
Thermal Pack
2nd Deep Cycle Battery (dual batteries)
Flush Mount Glass Top Sink/Stove Upgrade
King Bed Slide-out on Cabover Bed
Smooth Aluminum Siding
Solar Panel w/ controller
Torklift Glow Steps


Known issues:
Cruise Control is not currently functioning
Seatbelt light on dash is on, seatbelts function normally
Dent/scratch in FWC entry door
Small punctures in FWC door screen
Vehicle has been used for what it was designed for & includes some light pinstriping

Please respond here with questions or feel free to call me, Chris @ 805-901-8242

 

[ripperj]

That’s a sharp looking rig

I’d post a few pics in the thread


Sent from my iPhone using Tapatalk Pro

 

[SDDiver5]

Great looking truck!

 

[Kingsize24]

That's a DAMN NICE rig!

 

[hankgs]

The PERFECT set up... Well done. I had a 02 Cummins with a FWC and never had enough room to store ********...Always thought a contractors bed would be the bomb.

 

[McLean]

The PERFECT set up... Well done. I had a 02 Cummins with a FWC and never had enough room to store ********...Always thought a contractors bed would be the bomb.

Thanks! It has been a game changer

 

[McLean]

Added a few pics to the Google album of interior if truck and camper and outside kitchen setup. Will adds more to this thread once I get back to my computer.

 

[djm68]

Perfect setup! The contractor boxes are aluminum with a steel frame?

DJM

 

[SCD]

Great rig (I have a similar ’98 Ram w/ the 12 valve & club cab doors that open : ). The custom utility bed makes me drool. Also, where did you source the sweet rear bumper/hitch w/ singable spare tire and bike rack?

 

[djm68]

Perfect setup! The contractor boxes are aluminum with a steel frame?

DJM

Just saw the details in the description -- nicely done! Love this setup.

 

[McLean]

Perfect setup! The contractor boxes are aluminum with a steel frame?

DJM

Just saw the details in the description -- nicely done! Love this setup.

Thank you! The front boxes are all Aluminum. Rears are 16ga steel & powdercoated(this size wasnt available in Aluminum). As you could probably tell from the photos, these started as stock truck boxes (Buyers Products) thate were selected for the door size I needed. Then they got cut, sectioned and rewelded to fit. This way they function and seal perfectly.

 

[McLean]

Great rig (I have a similar ’98 Ram w/ the 12 valve & club cab doors that open : ). The custom utility bed makes me drool. Also, where did you source the sweet rear bumper/hitch w/ singable spare tire and bike rack?

Rear bumper is custom built in-house. I needed to move the bumper and hitch up and back for the new bed/camper setup. Also you can't fit a 35" spare under these trucks (****** Dodge?!) so it got a swingout and the hitch addition seemed like a no-brainer. I also wanted it to swing driver side which seemed impossible to find.

 

[McLean]

I'd really like to sell this setup together since it is mostly tailor made. Make an offer!

Or potentially willing to separate. Bed would have to go first. Make an offer!

 

[sbc]

Still available?

 

[McLean]

Still available?

yes