200 Series Wheels
- Thread starter kaschool
- Start date
DaveInDenver
Middle Income Semi-Redneck
Those are Tacoma TRD wheels, right? No go on a 200 series for sure since they'd be 6-bolt and the 200 series has the 5-bolt hubs.
Are there TRD wheels from a Tundra you might like? Those would work.
forum.ih8mud.com
Are there TRD wheels from a Tundra you might like? Those would work.
Tundra wheels on Landcruiser?
I have a 2000 Landcruiser. I found a set of new take off 2008 Tundra wheels/tires and I wanted to know if these would fit my LC? Thanks in advance.
forum.ih8mud.com
DailyJeep
Adventurer
FN Wheels did/does make a 5 lug knock off compatible with Tundras/200 Series (done in an 18", not 17" wheel). They have removed them from their website, but might available if you call them directly.
Here's a thread about them, mounted pics on page 2:
www.tundras.com
Also from ih8mud, erroneous info at first but then corrected to the 18" TRD imitation:
forum.ih8mud.com
Here's a thread about them, mounted pics on page 2:
FN FX PRO Wheels
I recently picked up new FN Fx Pro wheels from Dustin over at FN wheels. Which included the lug nuts and the blank black center caps. Dustin was well...
www.tundras.com
Also from ih8mud, erroneous info at first but then corrected to the 18" TRD imitation:
FN Fx Pro wheels on 200 series
Has anyone tried fitting the FN Fx Pro wheels (17x8) on their 200? Thinking of these wheels with 285/70/17 tires. The offset is 0, so given the +35mm stock offset plus larger diameter tires I am thinking no room in wheel well without a lift. I'm thinking of a small lift (1-2") but not sure if...
forum.ih8mud.com
Man I feel stupid... 5 bolt vs 6 bolt - should have realized that. thanks much for the feedback.Those are Tacoma TRD wheels, right? No go on a 200 series for sure since they'd be 6-bolt and the 200 series has the 5-bolt hubs.
View attachment 542210
Are there TRD wheels from a Tundra you might like? Those would work.
Tundra wheels on Landcruiser?
I have a 2000 Landcruiser. I found a set of new take off 2008 Tundra wheels/tires and I wanted to know if these would fit my LC? Thanks in advance.
I'd like a nice 17" wheel ideally - this would be a spare set for winter/offroad driving and I'd likely have KO2 installed on them - so basically I could switch from summer to AT tires when necessary. Have been looking for TRD Rock warriors but struggling to find a good deal set on those
thanks a lot for the info! I will look into these options ....FN Wheels did/does make a 5 lug knock off compatible with Tundras/200 Series (done in an 18", not 17" wheel). They have removed them from their website, but might available if you call them directly.
Here's a thread about them, mounted pics on page 2:
FN FX PRO Wheels
I recently picked up new FN Fx Pro wheels from Dustin over at FN wheels. Which included the lug nuts and the blank black center caps. Dustin was well...
Also from ih8mud, erroneous info at first but then corrected to the 18" TRD imitation:
FN Fx Pro wheels on 200 series
Has anyone tried fitting the FN Fx Pro wheels (17x8) on their 200? Thinking of these wheels with 285/70/17 tires. The offset is 0, so given the +35mm stock offset plus larger diameter tires I am thinking no room in wheel well without a lift. I'm thinking of a small lift (1-2") but not sure if...
molanginaeda
Observer
The Tundra TRD rock warrior 17” will fit LC200, but the wheel is discontinue by Toyota. You can look into a used set of wheels off any Tundra TRD Rock warrior.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Kayak Taco
New member
Icon Alloys also makes the Rebound in good specs for the 200 series. I've been looking for the elusive Rock Warriors, but for the price of a good used set of Rock Warriors, you can buy a new set of Icon Rebounds, which I think have a better offset for bigger tires anyway (+25 vs +50 on the RWs)
mep1811
Gentleman Adventurer
www.Ih8mud.com is a great Land Cruiser resource.
forum.ih8mud.com
200 Series Tire and Wheel Size Database
I want to give a shout-out to @DirtNap. He has updated my database and made it more user friedly. UPDATE #1: A disgruntled member keeps deleting portions of the database, so I had to remove the editing abilities for everyone. :meh: For now, just submit your info via a reply to this thread...
forum.ih8mud.com
Love these. Where I’d you get them? Model?
mep1811
Gentleman Adventurer
Tundra wheels
Steel Wheel, Rim 18x8 - 69512
Transwheel Steel Wheel, Rim 18x8, 5x150mm Bolt Pattern, 18 Hole - 69512
www.wheelsandcaps.com
hello Mike, I am unable to find these wheels on their site. Can you please share a link?
mep1811
Gentleman Adventurer
That is the site I used. Try Ebay.
4x4tripping
Adventurer
beautiful!!