2006 Project TJ

[Daz7]

Yes I did sort it, as per the video changed the sender and after that, pulled the connectors off the ECU and sprayed contact cleaner over them. Haven't had the issue since. You're reading low on a mechanical gauge, so you need to look deeper. Oil pump or big end bearings maybe?

 

[Daz7]

Dropped off the Jeep for ARB lockers, diff rebuilds and ratio changes. Whats it like before and after?

 

[Daz7]

Added a couple of PIAA driving lights to the TJ.

 

[Daz7]

Clocked up 200,000km's in the TJ now, whats it been like?

 

[Daz7]

After being defected for a non compliant front bumper. I figured I unfortunately needed to replace the Metal cloak version with something else.

 

[Antwon412]

Love the Jeep. Had an 02 and am looking to get another TJ as my offroad toy.
is yours the 4 or 6?

 

[Daz7]

A quick review after 8000km of the Black Magic Brake pads.

 

[Daz7]

Just replaced the old worn out windscreen header seal with a new one. Wow, I didn't realise the old one was so worn.

 

[Daz7]

I've had some issues with 0344 codes and intermittent engine stumbling as a result, turned out to be a very simple fix.

 

[Zeep]

Glad it was a easy fix for you. That's one of the reasons I avoid intentionally going through the mud.

 

[Daz7]

Found out MSD ignition did a coil rail for the TJ.

 

[Zeep]

Nice job Daryl. I have to agree with the bling comment. Nice touch, to a otherwise bland engine bay!

 

[Zeep]

I did some poking around yesterday, on the coil rail subject. I noticed on Rockauto, that they list a Blue Streak part.
Back in the day of cap and rotors, this was my go to brand. As they held up very well with their brass contacts.

 

[Daz7]

I did some poking around yesterday, on the coil rail subject. I noticed on Rockauto, that they list a Blue Streak part.
Back in the day of cap and rotors, this was my go to brand. As they held up very well with their brass contacts.

Caps and Rotors, I don't miss those things one little bit.